New Life Games LLC

**Reel Slots** Gaming Machines => IGT S2000 and Vision Games => Topic started by: Brianpg on January 14, 2023, 01:01:24 PM

Title: S2000 meters won’t stop
Post by: Brianpg on January 14, 2023, 01:01:24 PM

I tried jumping the two end wires together like everyone says but they won’t stop turning. Any other way to do this thanks

Title: Re: S2000 meters won’t stop
Post by: Stayouttadabunker on January 14, 2023, 02:02:25 PM

You can smash the meters with a steel hammer. :rotfl:

Obviously you're haven't disconnected the meters from the harness or the meters would NOT be turning right?


Disconnect the meter harness connector NEAR the meters, and stick a wire INTO the the two FEMALE pins ( Pin #9 & Pin#10) that you see in this photo.

Click on photo below to enlarge if needed...>>>

Title: Re: S2000 meters won’t stop
Post by: Brianpg on January 14, 2023, 02:09:11 PM

So I need to unsolder that part from the meter board?

Title: Re: S2000 meters won’t stop
Post by: Stayouttadabunker on January 14, 2023, 02:16:09 PM

Noooo...I never said to un-solder anything!  :fryingpan:

Just unplug the connector going to the meters.

The two wires that you need to jump together are Black/Orange and Brown/Light Blue.

Title: Re: S2000 meters won’t stop
Post by: Brianpg on January 14, 2023, 02:22:03 PM

I got it thanks

Title: Re: S2000 meters won’t stop
Post by: Stayouttadabunker on January 14, 2023, 02:26:05 PM

Awessome!
Mark your topic as "Solved"!  :applause: