New Life Games LLC

**Video Poker, Keno, Slots, 21** Gaming machines => IGT I-Game and Game King => Topic started by: rjpohl on November 25, 2022, 09:16:52 AM

Title: problem reading software eproms for older Igame
Post by: rjpohl on November 25, 2022, 09:16:52 AM

I have a set of software that plays perfectly but I'm unable to read the base or game chips.  Both give a checksum of 0000 and show no text after reading.  Usually there is text with chip number etc.  This is the only set I'm have this problem with.

I did save files, and then made new chips but the game didn't work.  Red light on processor board.  Older software dated 9/12/01 (see pic)

thanks for any help/suggestions.
Bob

Title: Re: problem reading software eproms for older Igame
Post by: 474lsa on November 25, 2022, 08:09:08 PM

Hi Bob,
  Not sure why you burner won't read those, but I sure hope you get them read!  From my files that is three stooges software and I would love to play it!

Title: Re: problem reading software eproms for older Igame
Post by: Tilt on November 25, 2022, 08:16:19 PM

Try peeling the labels off and see what the actual numbers are on chips.  Perhaps they're different that what you're selecting in your EPROM programmer software and that's what the problem is?  The data on them is obviously good since they work in the machine.