New Life Games LLC
Monitor Repair Log and Database. **Arcade and Gaming** => LCD and CRT Monitor Repair Tech Support => Topic started by: Ryengoth on July 10, 2018, 08:04:12 AM
-
I am trying to determine if I can replace the chassis and 8-pin neck board on this monitor. The horizontal yoke measures 3 ohms which should be OK but the vertical is 1 ohm. I can not find yoke specs for this display anywhere on it or online. I would not expect vertical to be less than the horizontal so my initial assumption is it's shorted and will be relegated to the trash dump. Was hoping to salvage it for someone wanting an original display in their stand-up arcade. Any ideas on yoke specs for this model?