New Life Games LLC
**Video Poker, Keno, Slots, 21** Gaming machines => Pot-O-Gold => Topic started by: Inu1892 on May 04, 2016, 01:52:24 PM
-
I can't set the touch on the pog is there way to reset it manually when I try to calibrated it the lil circles that shows while moving around they only appear on the outer dark blue and black area and I can't make them go to the reset or any squares what would I need to do? Any healp would be appreciated.
-
What are your dip switch settings and what monitor are you using ?
-
Only dip switch 1 and 4 are up the rest are down it was working until I started it calibratijng pressing the x on the left then right on the top and it switch out and now I can't do anything and screen its and LCD I don't know what brand it doesn't having any logo
-
You can turn the attendant key switch until you highlight the desired button then turn the supervisor key switch to select it.
-
most of the time 2 and 4 need to be on. There is elo or microtouch settings. 1 should be off. Try that, and there is a pog manual available on here somewhere that has all the dip settings in it, but all the ones i use only have 2 and 4 on. Try that.
-
I tried that dip switch setting but no work this time I was able to take a pic. The lil round white circles only go that far and I can't get it on the start touch calibration I did it onand I mess up or it something I click the senc x on the blue screen and it exited so now I'm stuck
-
Have you tried to use attendant key/switch to navigate on the touch screen calibration screen to select the first option I.e, start calibration and then touch on the x to calibrate the screen ...if it still won't let u then u need to remove the bezel from the monitor and clean the edges of the monitor and try again...most of the times there is dirt/dust build up on edges which kills touchscreen sensors...very easy fix