New Life Games LLC

Bill Validators, Currency Acceptors and Printers => Other Bill Validators => Topic started by: Rpowell18 on April 24, 2019, 04:40:21 PM

Title: imonex coin acceptor
Post by: Rpowell18 on April 24, 2019, 04:40:21 PM

i have a 1998 igt double 5x's pay with an .25 imonex acceptor in it ..i did some research and found out a few things, but nothing for a slot machine..Do you put a quarter somewhere in the acceptor..thanks here is the machine it is in..i got it for 60.00 ..i am replacing the missing parts and putting a bill validator in it .. any help will be great

Title: Re: imonex coin acceptor
Post by: GOS on April 24, 2019, 08:15:09 PM

if machine has an imonex coin acceptor that was working - you will need to replace the coin optic board located just below the imonex - there is a diode Q4 or Q2 depending on the board - that was cut to allow the imonex to work.

Title: Re: imonex coin acceptor
Post by: Rpowell18 on April 25, 2019, 03:38:39 AM

Ok thanks..I will see how well it works first ,or just replace the whole piece later

Title: Re: imonex coin acceptor
Post by: Jim on April 25, 2019, 07:12:16 AM

If the Imonex is working, then you don't have to do anything, they do not require a sample coin like the CC-16.  keep in mind that when you order parts for that machine, you have an S+ type machine, not a S-2000


Jim

Title: Re: imonex coin acceptor
Post by: Rpowell18 on April 25, 2019, 11:54:07 AM

Ok great...thanks again