New Life Games LLC
**Reel Slots** Gaming Machines => IGT S2000 and Vision Games => Topic started by: trashman on December 27, 2019, 08:57:00 AM
-
so here is a pic of back side should there be a plug at the end of monitor where there isnt one.are there any fuses for it.thanks
-
That 4-female pin Molex is not needed for your DDD game really.
No fuses up there for you to look at all.
Check to see if the 3-wire COMM harness is plugged into the front of the Net Distribution panel in the cabinet.
Check voltage coming from the Netplex harness going to the connector at location [U10] or
plug in a regular desktop computer power supply into the 4-pin connector at Loc:[J5] on the LCD MPU.
This is a good way to see if the invertor board lights up the LCD screen and boots up the RadiSys.
-
IM A SUPER NEWBEE to these s2000 if you have time can you send pic of Net Distribution panel where it should be pluged in the cabinet.thank you
-
No camera here at the moment.
Open the door, take out the tray & place aside.
Never remove or plug in anything with the power switch on - unless we tell you.
Or you will be buying parts forever.
Pull out the hopper and place aside.
Right behind the hopper you'll see a red LED lamp.
Look above it and you may see a 7-pin black Molex plugged in the top left of the box that has 3 grey wires with a black stripe, an orange stripe, and the top one with a yellow stripe.
Is it plugged in there?
If so, leave the hopper and tray out and the door partly open.
Turn on the power switch and tell what happens....in detail.
Remember, the more you tell/show us, the better we can help you.
I cannot stress that enough.
Make a video maybe if you can and put it here.
-
ok here is a pic of board when 1st turned on red light came on and stayed on nothing else.so then i closed door to give you what displays say to try to help 1 self test passed then 2 waiting for video display.3 then display goes blank for some time 4 then reels spin 5 then winner says no and credits says disp. finally machine says 1 call attendant 2 video display comm failure 3 closure m 4 restart.but this time looking under where coin tray was the red light wasn't lit i also tried it with door open again the red light never lighted again
-
okay...
Your 3-wire COMM looks okay.
Can you remove the glass from the topbox and take a picture of everything in there?
I want to see the back wall behind the LCD and also in the extension plug unit in the back left side of the topbox.
I have a feeling there's something up there that isn't needed for home use and rather is used for casino COMM and not for home use.
That red LED isn't supposed to be on at all. (On the power distribution panel)
Not only that, your distribution panel box has a fuse on top that most don't have.
The black knob that is really a fuseholder.
It's on top, in front of the 1st leftmost Molex connector for 115Vac. (Do NOT disconnect with power on!)
Most units don't have a glass tube fuse there...usually it's a "re-settable" 6-amp fuse.
I'm thinking a setting ( SAS or another protocol COMM ) is still turned on that we need to disable in order for you to play it.
I don't know yet but the red LED is pointing me in this direction.
They're supposed to look like these ones and none of these have that black fuseholder like yours has.
However, the fact that the red LED came on tells me that there's power on the com board inside.
But it doesn't tell me if you're getting 12Vdc going upstairs to the LCD.
Did you ever get a chance to power up the LCD with a regular desktop power supply?
If not, you need to undo the Netplex harness going to the LCD and check the voltages coming outta that harness to see if you're getting the power.
Click on photo below to make larger if needed...>>>
-
ok heres pics also can you tell me what plug is the power plug on monitor 1,2,3 or 4 thank you
-
You'd have to open the rear panel to see what the rightmost connector is.
I will guess it's a power connector running to loc:[J5] on the 486CPU.
Of course, it could also be anything else and we won't know until you open the panel.
Do that and send me a picture and I'll tell you if it's a power Molex or not.
-
here is a pic
-
Yep....that's an auxiliary 12 volt power connector to drive an optional LED light around the opening in the glass around the display screen.
Red/green/green/green = 12vdc/GND/GND/VCC
Your LCD doesn't need it to run because the Netplex (#4 in your picture in Reply#6) should supply the two voltages needed (25vdc & 13vdc).
Where are those 2 black wires in picture "bbb" coming thru the round hole going to?
The small double and the larger round one.
They look like 115Vac wiring?
-
the single fat wire is for the topper the double wire goes to a black box left side by reel the other end goes to pic aa
-
the single fat wire is for the topper the double wire goes to a black box left side by reel the other end goes to pic aa
okay...sounds like power for the topper....I didn't even see it...it's on top of your roundtop. :rotfl:
Okay...gimmie a minute here and I'll get back to you.....get your multimeter out...we gotta check some plugs for power for the LCD computer.
First of all...does the fan (has a black wire & a red wire) on the side of the LCD computer near the memory sticks come on when you turn on the machine??
-
yes fan come on
-
Hmm...sounds like power invertor for LCD gone bad...
This is a little video clip I tried to make for you on checking voltages going down the Netplex harness to (#4 in your picture in Reply#6).
https://youtu.be/iofmjpqdxBQ
If you're NOT getting the voltages, then the problem is further back to the Netplex Distribution board in the back wall of the topbox perhaps.
If you ARE getting the voltages, but the LCD isn't displaying the running Windows MS-DOS, then the problem is most likely with a spent/burned out LCD invertor.
The invertor lights up a tiny fluorescent tube like in cellphone screens.
It's located on the left side of the LCD computer under the fan under the metal casing.
Removal of just 2 Philips screws allows that box to open.
Basically it's a "ballast" to lite up the screen.
They look like this photo below...>>>
-
i got 12.7 for red wire and 24.9 for the other one.as for that invertor board i cant find it.
-
If you blown up the photo I posted, you would see "LS520" imprinted on the LCD inverter board...Google that
ohh...here this guy's selling a pair...>>>
https://www.ebay.com/itm/LCD-inverter-Board-For-LS520-LS520A-RD-P-0542A-YMX92V-0-E221347-tracking-ID/173574193637?hash=item2869d401e5:g:s-gAAOSw-btaoPlA (https://www.ebay.com/itm/LCD-inverter-Board-For-LS520-LS520A-RD-P-0542A-YMX92V-0-E221347-tracking-ID/173574193637?hash=item2869d401e5:g:s-gAAOSw-btaoPlA)
-
i ordered them now to find them thanks again
-
do you know what model the monitor maybe and then i can google it.i dont see any board like that on this monitor housing anywhere
-
It's in the box on the left when looking from the back.
I described where it was in Reply#13?
If it's not there, that explains why the LCD doesn't light up! haha
Disregard the color of my inverter backlight board....I soldered a different one in there but it works because it lights up the same sized LCD backlight tubes.
Yours that you've bought, will be green for the Sharp 10.4" LQ10D421 LCD
Click on photos below to enlarge if needed...>>>
-
From China. Expect 4 weeks for delivery.
-
Probably 4 times that here in the states...lol
I got my last LCD computer from a member in Norway!
Place a WTB ad for an inverter board in the Classifieds section of NLG...maybe a member will have one for ya?
-
i pulled the monitor and didn't see it .that's why i asked.it didn't want to start take the box apart,but its right where the picture shows lol.i have ordered lots of stuff from china. that's good it will give me a brake from this project :dancing_2: thanks again i post asap my results
-
ok installed board monitor fired up thank you .it says good luck then this.here is a pic should it do any thing else during game play.i noticed a battery on board whats that for.thanks
-
Need to know 2 things. What sb chip is on mpu? What bgm# is on the data card in the monitor?
-
There are two batteries in a Vision machine.
One would be on the main MPU in the cabinet.
The other is on the circuit board in the LCD computer in the topbox. :propeller:
The machine is fine right now - no need to check batteries.
Plus, if you remove them, you will lose all the settings and we'll all be back here trying to show you how to reset everything you've lost.
-
ok im not messing with battery's. i hate to say this but im a dumb no bee to the s2000 so i dont know where the sb chip is located on the mpu .also i dont know where the data card is either on the monitor .im sorry
-
okay...if you can wait a few minutes, I'll upload you a link to a short video of how to see what software you have installed and you won't mess up your machine.
Okay...just remember, my unlabeled round deck button is the regular Spin button....not the Max Bet button...
Here's the link to a short instructional video clip I made for ya!...>>>
https://youtu.be/SLujGFh9gHM (https://youtu.be/SLujGFh9gHM)
-
thank you i got it i will mess with it tomarrow
-
Fantastic Video Mark. Very easy for a new guy.
-
ok the sb chip is 001000.as for get the bgm number there is no set available on my screen.i will post picks.finally i want to bring this to everyone attention ,when i got this game the board had no version chip some one on the form made me one.thanks
-
here is screen shot
-
Ok, with that sb chip you have a ss chip under your version chip. What you are seeing on your screen is normal. No real bonus game, mostly good luck or other generic saying. Kind of a waste of a vision game . Having it work is fantastic as you can find other vision kits that are super fun. Search YouTube for igt vision to see some great games.
-
i love the pick panther thats what i want to turn this into but the monitor off to the side.well thank you every one for your help.now all i need is to get the coin part working then im golden.
-
Spin Inc. Has pink panther glass and some reel strips. Check with bunker for strip numbers
-
Spininc has six RT "Pick A Panther"3R5L5C glass left - no belly glass or strips to match.
They also have a couple of 16" Panther Bucks 3R1L2C glass too.
At least they're both center-mount glass.
Best thing to do is to give them a call.