New Life Games LLC

Monitor Repair Log and Database. **Arcade and Gaming** => LCD and CRT Monitor Repair Tech Support => Topic started by: danatlvc on June 18, 2020, 09:18:56 AM

Title: Ceronix 1793 17" CRT 19 Pin Help
Post by: danatlvc on June 18, 2020, 09:18:56 AM

This monitor came out of a working Game King that was converted to LCD. It's the type with an Isolation Transformer
Oddly it only works in a few 17" cabinets. The majority of cabinets I get a solid colored screen with trace lines and then it goes out in 30 seconds like something overheated. No burn or smells. Then it won't power back on for a good 15 minutes.


Any help or suggestions would be greatly appreciated.


I wanted to sell the CRT alone as I have a customer, but unable to because of this issue. Waiting for a rare cabinet to come in that it will work in so I can sell it as a CRT machine. Never ran across this before. A CRT either works right or not in all 17" cabinets in my experience. Strange

Title: Re: Ceronix 1793 17" CRT 19 Pin Help
Post by: irascible51 on August 18, 2020, 01:24:41 PM

     What might the likely LED swap after the Ceronix 1793.   My GameKind is sometimes out of convergence and then went black.   Times to repairs and this has been a fun device.




                                                                                                                     Best regards,




                                                                                                                    Bob Petersen




Au Sable Forks,  NY   12912