New Life Games LLC
**Reel Slots** Gaming Machines => WMS Reel Games => Topic started by: bondoexpress on August 27, 2014, 03:03:13 PM
-
Hello is this machine a Bluebird 2 or different and can these machines be purchased yet looking for a game like this in the picture Thanks
-
The ones in your pic. are BB-2. There are some vendors that have them, Expect to pay a few dollars.
-
Can a BB1 be converted to a BB2 if so are they costly also how can you tell when it's a BB2 Thanks
-
The machine has a solid black grille over speakers,dual screen 22's,and slighty diff. curves,etc. Don't even think a BB-1 would run those games in your pic either. Yes, You can convert a bb-1 to bb-2 (they call it a 1.5 when you do it) but same as bb-2. Forgot the oled button panel deck also. Yes, It can be costly to convert. Depending on your fundage you would need to weigh converting price VS buying a bb-2 born that way from wms.
-
To add a few more thoughts. All BB2's I've seen have the generic WMS glass right above the OLED panel deck. The BB1's are usually theme oriented. For a while there were the BB1.5's, which was basically a BB1 cabinet with a bb2 cpu and an OLED button Deck with dual 19" screens.
If you are handy, you could probably save around 1K buying a BB1 and converting it to a bb2. The hardest part is fitting the 22" monitors into the bb1 cabinet and finding or making up a nice bezel to finish it off. In a nutshell, these are the parts needed:
1. bb2 cpu
2. dual 22" monitors, only the bottom one is touchscreen, the top one is just a monitor.
3. The OLED panel, although this one is not a requirement, but it sure makes your machine look good.
You will need to make the harness to connect the lower monitor and make brakets, bezel, etc in order to fit it into the place where the old 19" monitor was.
-
Yes, rick is correct, I did not want to go into detail. Also look at your pics and see the lit up wms logo in the bottom-BB-2.
BB-2 cpu-no software--5-1200 depending on where you find them
22"-inch factory wms monitors-lower touch/upper monitor- (these must be correct ratio etc.)-varies--700.00 minimum
metal work,top box or whole machine (don't know what you have) ----Price?
Software-this can be a biggie depending on what you want--?---100.00-2,000
Are we getting started yet?
-
BB-2 cpu-no software--5-1200 depending on where you find them
I'll take 10 of them for $500, let me know where I can get them for that.
-
BB-2 cpu-no software--5-1200 depending on where you find them
I'll take 10 of them for $500, let me know where I can get them for that.
Make sure you leave me one for $500 please!!!!! hahahaha
I think its ridiculous how much they want for BB2 MPUs. highway robbery but if Sizz has one for $500, I'll buy it right now!