New Life Games LLC
**Reel Slots** Gaming Machines => IGT S2000 and Vision Games => Topic started by: RobinAK on June 19, 2021, 09:57:59 AM
-
So I got a S2000 the lower candle is flashing fast. Machine is working fine other than that as far as I can tell. Ive been looking but haven't seem to find what exactly what a fast flashing lower light means.
-
Open drop door??
-
I also had this issue recently and found this from one of the PSR's
"On a two-stage candle, the top level lit signifies a change request or machine- disabled mode. A slow flash on the top level signifies a tilt or hand-pay condition. A fast flash on the top level signifies the Operator or Attendant Menu is being accessed. A medium flash on the bottom level signifies the maindoorisopen. A fast flash on the bottom level signifies the drop door is open."
The only odd thing is, my drop doors are bypassed, no way they are open, and I occasionally get the same fast flash.
I thought maybe it had something to do with the attract modes? But it's stopped flashing so I quick looking.
-
The door switch has been jumped. Its flashing fast. My other S2000 flashes slower with the door open.
-
Is there a message on the VFD when the main door is open?
-
Does sound like Drop Door Open. A damaged trace near the Varta battery area, or a bent pin on the short MPU board connector?
-
RB yes the I get a door open message when I open the door. I haven't had time to look at the drop door circuit. Some things have come up and I'm super busy for a bit. What colors would the wires be for drop door ckt?
-
So I finally made the time to get this diagnosed & fixed. Problem was drop door circuit. No jumper was installed. Jumped the circuits and the light is off! Thanks to everyone.
-
Rob, or anyone....
Can you elaborate some on the Drop Door bypass procedure? Which circuit are you referring to?
I came across this thread while searching for answers to my problem, so this is why I've revived this particular thread.
Am I confusing Drop Door with Belly Door?
I've got the same issue on an S2000, no Error Messages, Fast Blinking on Lower Portion of the Candle. Game plays perfectly. Belly Door Switch is Bypassed.
Thanks,
Curtis ash100
-
Drop door is not belly door. Later today (its 4am atm) I will go out to that machine and see what the wire colors are and take a pic or two and send them to you. Its a circut for a door in the stand is what i was told. It was a longer two wire lead in the bottom area of cabinet.
-
Thanks for the reply, I was able to figure this out.
Drop Door was turned on in the Candle Options Menu.
Disabled it and all is well.
Curtis ash100
-
Thanks for the reply, I was able to figure this out.
Drop Door was turned on in the Candle Options Menu.
Disabled it and all is well.
Curtis ash100
Oh good! I totally forgot about this. Sorry about that.
-
Hello, I have the same issue with a S2000 Reel Touch, can you tell me how to reach this menu to disable it?
-
What you're looking for is in Door Closure Candle On/Off 3.1.2.2 under Machine Options.
Download and read...>>>
-
Thanks, it worked, machine is 100% fine now. Well.. for now :24:
-
Thanks, it worked, machine is 100% fine now. Well.. for now :24:
Until you stick in the Clear chip again.... :facepalm: :Tongue_Out:
-
I don't have any clear chip and no idea where to source one. I hope I won't need it.