New Life Games LLC

**Video Poker, Keno, Slots, 21** Gaming machines => BALLY Game Maker => Topic started by: Tacman on February 08, 2014, 09:23:07 PM

Title: Gamemaker Volume Control
Post by: Tacman on February 08, 2014, 09:23:07 PM

I have a Bally Game Maker, upright, video machine V7200. Just installed a new LCD Screen. The sound is very low...how can I adjust the Sound? Where is the sound volume setting or controls.?? I can go into the Configuration and the sounds all play (http://newlifegames.net/nlg/index.php?topic=27176.0#).. but very low.......

Update...just tried the machine again and now I have NO SOUNDS...Can anyone help?? In short..I went from LOW sound to NO sound....one of the other posts mentioned the 470uF 25 volt capacitor? or any other ideas are appreciated?

I waited a half-hour.....tried again.... and now I get a very low sound again!!!!

Any advice is appreciated.

Thanks
 Â« Reply #1 on: 07-12-2013, 23:26:40 »The volume control is on the MPU board, mounted on the tray just above the monitor....  See attached...

You may or may not have the white plastic shaft on yours, if it is missing, use a small screwdriver...

Warning: Never pull or replace the MPU board/tray with the machine powered on...