New Life Games LLC

Arcade Games, Pinball, Crane Games, Redemption Games and Other Stuff => Pinball Games => Topic started by: trashman on March 30, 2014, 03:32:17 AM

Title: phantom of the opera back box flasher problem
Post by: trashman on March 30, 2014, 03:32:17 AM

hi when i put game in coil/flasher test flasher bulbs blow there 89 as should be.i havent done a voltage check yet but im guess there to many volts does anyone know how to fix this thanks :thank_you:

Title: Re: phantom of the opera back box flasher problem
Post by: Todd Scott on April 20, 2014, 12:19:36 PM

Is it just that one that blows? Any of the other flashers blow? Don't really know off the top of my head but is their supposed to be a diode on that one?

Title: Re: phantom of the opera back box flasher problem
Post by: trashman on April 20, 2014, 01:00:06 PM

all of them in the backglass blow as differnt groups light, so i bought some 28 volt bulbs problem soveled for now.

Title: Re: phantom of the opera back box flasher problem
Post by: rcoonjr on May 09, 2014, 10:06:32 PM

Is it all the flasher in the back box or just one...putting a 28 volt bult (1251 I'm assuming) in a 89 socket will put some stress on the drive transistor for that circuit... I'd get the schematic and locate which flasher it is... and change the associated transistor for it..

I own a phantom .. I built it from parts and it runs like a new machine.

Title: Re: phantom of the opera back box flasher problem
Post by: Mr. Dinoman on May 10, 2014, 12:30:31 PM

Replace your TIP122's and related diodes...Here is a lamp layout...
Jimmy

Title: Re: phantom of the opera back box flasher problem
Post by: trashman on May 11, 2014, 02:42:24 PM

 i may do that this winter.im not really playing my games much this time of year.i copyed the diagram.Thanks for everyones help