Progressive Controllers and Displays > IGT Stand-alone Progressive Systems |
IGT S2000 Slot Machine 960 Spectrum board |
(1/2) > >> |
FORDF150:
hi what can you tell me about this board spectrum 960 and the display meter I don't know where thes wires this my first time having one of these in my machine s2000 do I need any extra cables or harnesses |
Harvs:
If I'm reading this right you want to plug in the Spectrum display into the machine? That display simply plugs into the S2000's small distribution board on the back wall if I'm not mistaken. I know it doesn't use/need a secondary board to run. |
Harvs:
Post a picture of the harnesses coming off that display. |
qbert:
You have a mixed bag of goods in your photos the only part that you need is the spectrum display in the last picture. That is a stand alone unit and will work without all that other stuff. It also looks like you have the correct harness attached to it. Just follow the directions in the post on spectrum displays. |
FORDF150:
Okay thank you I bracket I have shown in the picture I sent you is too small I need a bracket big enough so it fits snugly inside the bracket bracket and tracking panel cover I mean faceplate so it could fit snugly inside of the bracket is there one big enough that something might sell or have |
Navigation |
Message Index |
Next page |
Cell Phone and Pad Mode imode wap wap2 |
NLG Archives Archives @ newlifegames.net Wayback Machine |
Contact Us NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442 |