Progressive Controllers and Displays > IGT Stand-alone Progressive Systems |
Just bought a Spectrum Dual Display part |
(1/5) > >> |
bigdps:
Hi folks, I have searched but haven't found the easy question to my problem. I just got a Spectrum Dual Display and the only thing it has is just the part itself. The 9 inch display has a mii 6pin molex with nothing hooked to it. The 16 inch below, has a straight 5 pin black connector and below it is a medium sized 6 pin molex. The part number is 25302100 Rev B and there is a sticker below the window where the SDF104 R chip is and it is written on it, DWNLD TBSPEC 358879-400 190 From this info, how can I make this work on my Valhalla 044 slot machine? I am no electronic wizard to say the least but am pretty confident to tackle just about anything. On many of my games, I do have the possibility to write messages to go to a spectrum display as there is a diagnostic screen in the ROM section just for that. Please tell me I didn't buy this part for nothing. I don't care if it doesn't count jackpots or whatever, as long as I can display custom messages on it. :hail: |
rickhunter:
Here are the cables you need, if you have the parts and can make the cables I will make a pinout post for you to follow. The little cable that connects the two displays together is both connected and a spare is in the outside so you can see what the cable looks like. |
bigdps:
Awesome Rick! I have none of the connectors but if I knew their molex part number, I'm sure I could order them from Digikey or something. Do I need both displays or can I split them in 2 and get by with the bottom one only? |
rickhunter:
You can use just the bigger one if you want. I will post the pin-outs later. The connectors are all Mini-fit Jr connectors except for the 5 pin single row connector: 1 - minifit Jr 10 pin dual row with female pins 1 - minifit Jr 4 pin dual row with female pins 1 - minifit jr 2 pin with female pins 1 - minifit jr 6 pin dual row with female pins. 1 - molex SL part 50-57-9405 5 pin single row female. |
bigdps:
Just to make sure before I order them, are these the right part numbers? 39012100 39012040 39012020 39012060 50579405 And what size contact terminals should I get? 18-24 ? Tin or gold? Thanks Rick. Really appreciate your help. |
Navigation |
Message Index |
Next page |
Cell Phone and Pad Mode imode wap wap2 |
NLG Archives Archives @ newlifegames.net Wayback Machine |
Contact Us NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442 |