Help request with PE+ CRT to LCD conversion pls

[Dam0]

hey all, thanks for reading.

i have what i believe to be an IGT PE+ cab and motherboard

Code: [Select]

https://www.mediafire.com/view/605vlt41xxmhg4v/PE%252B-Motherboard01.jpg/file

Code: [Select]

https://www.mediafire.com/view/dkgyrjwbtr8llbt/PE%252B-Motherboard02.jpg/file

i have used GBS and can obtain an image, although the colours are inverted.

Code: [Select]

https://www.mediafire.com/file/q77cdu7owr6zfs7/WrongColour.mp4/file
screen should look like this

Code: [Select]

https://www.mediafire.com/view/pii1hb4ylxkhvri/RightColour.png/file
now ive read the PE+ CRT to LCD guide, specifically where i need to replace an IC

Code: [Select]

https://www.mediafire.com/view/t55yvwnmml0o5mh/PE%252Bguide.png/file
but on my board(assuming dif revision maybe), the IC is different at location u45.

Code: [Select]

https://www.mediafire.com/view/9fn3bejj3wnrd4o/U45-Location.jpg/file
please are there any suggestions?

thanks in advance,
D.

**edited to insert images as attachments, video is still linked

[Tilt]

My first suggestion is to resize those photos so they are less than 1MB and post them here as attachments.

[knagl]

Based on your pictures and your listed location, you have an Australian board which is not the same as the United States PE+ board used in the LCD conversion guide.

Unfortunately we only very occasionally see posts here about the board you have and I personally can't point you in the right direction as to what components may need to be changed to do what you're trying to accomplish. Hopefully someone else here might have some insight.

[Dam0]

@knagl,Tilt,

thanks for the replies

another option might be.....

does anyone have board layout files for the PROM -> EEPROM converter shown here?

thanks once again
D.