New Life Games LLC
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length

News:

Welcome to the NewLifeGames.com message forum! 

 


NLG Site Navigation Menu


Archives of old posts can be found at...... Newlifegames.net/nlg/

Author Topic: Project S2000 lots of issues  (Read 717 times)

0 Members and 1 Guest are viewing this topic.

Offline Phan000

  • Contributing NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 843
  • Reputation Power: 72
  • Phan000 Has a powerful will.Phan000 Has a powerful will.Phan000 Has a powerful will.Phan000 Has a powerful will.Phan000 Has a powerful will.Phan000 Has a powerful will.Phan000 Has a powerful will.
  • NLG
Project S2000 lots of issues
« on: February 10, 2023, 08:18:01 AM »
Picked up this double diamond haywire.

Was partially used as a parts machine & owner did not remove things very carefully.

With a PSU swap, only the board lights up and reels stiffen.

All of the fluorescents are gone,  but service light should turn on?

The coin-in display is gone.  Will replace.

VFD does not light up, even with known working board.

Would the missing coin-in affect the VFD?







« Last Edit: February 10, 2023, 10:42:50 AM by Phan000 »

Offline Tilt

  • Sr NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 4402
  • Reputation Power: 384
  • Tilt Is an-NLG GOD!Tilt Is an-NLG GOD!Tilt Is an-NLG GOD!Tilt Is an-NLG GOD!Tilt Is an-NLG GOD!Tilt Is an-NLG GOD!Tilt Is an-NLG GOD!Tilt Is an-NLG GOD!Tilt Is an-NLG GOD!Tilt Is an-NLG GOD!Tilt Is an-NLG GOD!Tilt Is an-NLG GOD!
  • Gender: Male
Re: Project S2000 lots of issues
« Reply #1 on: February 10, 2023, 12:34:07 PM »
Check the power supply output voltages and make sure you have a good +13 and +25v supply. 

I'd ditch the fluorescent lamps and electronic ballasts and use LED tubes in their place, but the e-ballasts operate off of the +25VDC supply.

The service light operates off the +12V power supply inside of and used by the comm interface.  It should work anytime the machine is plugged into AC power. 

The coin-in won't affect the VFD, but if the VFD controller is bad or doesn't have power it will. 

Offline Phan000

  • Contributing NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 843
  • Reputation Power: 72
  • Phan000 Has a powerful will.Phan000 Has a powerful will.Phan000 Has a powerful will.Phan000 Has a powerful will.Phan000 Has a powerful will.Phan000 Has a powerful will.Phan000 Has a powerful will.
  • NLG
Re: Project S2000 lots of issues
« Reply #2 on: February 17, 2023, 04:01:00 AM »
Started making a little progress on this machine.  Replaced mpu. Power supply, vfd, motherboard.

Machine boots now, but no lighting, fan, or service lamp.  Tried swapping good ballast, but still no florescent lights.

I’m get a coin-in error, and open MB.  I’ve jumped belly door switch.  Bill Val switch wiring is missing.

Cash out, spin, max bet buttons are lit, but do not work & machine won’t cycle through options using buttons.


Online Stayouttadabunker

  • Sr NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 5429
  • Reputation Power: 405
  • Stayouttadabunker Is an-NLG GOD!Stayouttadabunker Is an-NLG GOD!Stayouttadabunker Is an-NLG GOD!Stayouttadabunker Is an-NLG GOD!Stayouttadabunker Is an-NLG GOD!Stayouttadabunker Is an-NLG GOD!Stayouttadabunker Is an-NLG GOD!Stayouttadabunker Is an-NLG GOD!Stayouttadabunker Is an-NLG GOD!Stayouttadabunker Is an-NLG GOD!Stayouttadabunker Is an-NLG GOD!Stayouttadabunker Is an-NLG GOD!
  • Gender: Male
  • NLG
Re: Project S2000 lots of issues
« Reply #3 on: February 17, 2023, 06:26:36 AM »
Make sure all the big light blue and brown wires are connected from the power supply unit behind the reels down to the PDU - those wires carry the AC voltage for your fluorescent lighting.
Changing ballasts won't help if you don't have the correct voltage running thru those lines.
What voltage readings are you getting from the PDU?


Remember, the more you tell us - the better we can help you!

Consider becoming a regular contributing member, which helps pay costs to keep this site up and running so you can keep your machine up and running :)

Offline Phan000

  • Contributing NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 843
  • Reputation Power: 72
  • Phan000 Has a powerful will.Phan000 Has a powerful will.Phan000 Has a powerful will.Phan000 Has a powerful will.Phan000 Has a powerful will.Phan000 Has a powerful will.Phan000 Has a powerful will.
  • NLG
Re: Project S2000 lots of issues
« Reply #4 on: February 25, 2023, 02:39:55 PM »
Not making much progress.

There is power, however the wiring harnesses may be damaged.  Someone unbundled and disconnected multiple sections.

Still no fluorescent lighting.

What bundle/ end should I look to assess lighting issues?

Board is working, coin in and door b tilt still.

Offline Tilt

  • Sr NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 4402
  • Reputation Power: 384
  • Tilt Is an-NLG GOD!Tilt Is an-NLG GOD!Tilt Is an-NLG GOD!Tilt Is an-NLG GOD!Tilt Is an-NLG GOD!Tilt Is an-NLG GOD!Tilt Is an-NLG GOD!Tilt Is an-NLG GOD!Tilt Is an-NLG GOD!Tilt Is an-NLG GOD!Tilt Is an-NLG GOD!Tilt Is an-NLG GOD!
  • Gender: Male
Re: Project S2000 lots of issues
« Reply #5 on: February 25, 2023, 02:42:33 PM »
Check and see if you have +25VDC going to the ballasts for starters.

Offline Phan000

  • Contributing NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 843
  • Reputation Power: 72
  • Phan000 Has a powerful will.Phan000 Has a powerful will.Phan000 Has a powerful will.Phan000 Has a powerful will.Phan000 Has a powerful will.Phan000 Has a powerful will.Phan000 Has a powerful will.
  • NLG
Re: Project S2000 lots of issues
« Reply #6 on: March 05, 2023, 07:05:55 AM »
Make sure all the big light blue and brown wires are connected from the power supply unit behind the reels down to the PDU - those wires carry the AC voltage for your fluorescent lighting.
Changing ballasts won't help if you don't have the correct voltage running thru those lines.
What voltage readings are you getting from the PDU?


25v and 13v going into the PDU.

No power at any of the orange connections for the door harness, or top power supply.

Wiring is a nightmare,  not sure where to look or what to replace next.

Mpu is working and functioning with B tilt and coin in jam.



Online Stayouttadabunker

  • Sr NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 5429
  • Reputation Power: 405
  • Stayouttadabunker Is an-NLG GOD!Stayouttadabunker Is an-NLG GOD!Stayouttadabunker Is an-NLG GOD!Stayouttadabunker Is an-NLG GOD!Stayouttadabunker Is an-NLG GOD!Stayouttadabunker Is an-NLG GOD!Stayouttadabunker Is an-NLG GOD!Stayouttadabunker Is an-NLG GOD!Stayouttadabunker Is an-NLG GOD!Stayouttadabunker Is an-NLG GOD!Stayouttadabunker Is an-NLG GOD!Stayouttadabunker Is an-NLG GOD!
  • Gender: Male
  • NLG
Re: Project S2000 lots of issues
« Reply #7 on: March 05, 2023, 10:48:33 AM »
You need to plug in that multi-colored ribbon cable into the black ribbon header located just to the left of where it says "WAP" on the PDU.
It goes from the PDU into the backplane to a black header located on the right-hand side of it.


Also, on top of the PDU, in the middle sort of, there are two small black header connectors.
One of them is 2-pin connector.
There would be a 2-pin black connector harness with a red wire and a black wire plugged into it for the 12Vdc Service Lamp up behind the bill acceptor's cash box housing.
« Last Edit: March 05, 2023, 11:07:52 AM by Stayouttadabunker »
Remember, the more you tell us - the better we can help you!

Consider becoming a regular contributing member, which helps pay costs to keep this site up and running so you can keep your machine up and running :)

Online Stayouttadabunker

  • Sr NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 5429
  • Reputation Power: 405
  • Stayouttadabunker Is an-NLG GOD!Stayouttadabunker Is an-NLG GOD!Stayouttadabunker Is an-NLG GOD!Stayouttadabunker Is an-NLG GOD!Stayouttadabunker Is an-NLG GOD!Stayouttadabunker Is an-NLG GOD!Stayouttadabunker Is an-NLG GOD!Stayouttadabunker Is an-NLG GOD!Stayouttadabunker Is an-NLG GOD!Stayouttadabunker Is an-NLG GOD!Stayouttadabunker Is an-NLG GOD!Stayouttadabunker Is an-NLG GOD!
  • Gender: Male
  • NLG
Re: Project S2000 lots of issues
« Reply #8 on: March 05, 2023, 10:50:00 AM »
If you can in the future, use the green  "Attachments and other options" button under the text to add photos.
To get to it, hit the green "Modify" button up on the right hand corner here.
Putting photos into the text area makes it hard to look at the photo because you can't move the photo around.

You're right about the wiring tho...its a mess right now but not that hard to figure and straigthen out.
To make it neater, you need to separate harnesses that go to different devices and areas in the machine and tie wrap them.
Remember, the more you tell us - the better we can help you!

Consider becoming a regular contributing member, which helps pay costs to keep this site up and running so you can keep your machine up and running :)

 

Cell Phone and Pad Mode

imode wap wap2

NLG Archives

Archives @ newlifegames.net Wayback Machine

Contact Us

NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442
If you find this site helpful, please consider becoming a Contributing NLG Member with a monthly subscription to help cover the cost of pizza, coffee, aspirin, hosting, and bandwidth.
Contributing Members: get unlimited personal messages, can save topics and replies as drafts,
can post to the Classified ads, get unlimited access to the downloads, and also get this minty badge:



**Subscription Link** (Click Here) **Subscription Link**



           
If you would rather remain anonymous Thank You or just want to help support the site, please use this "make a donation" button:




From your entire NLG staff, thank you for supporting NLG.


New Life Games LLC 1788 HIGHWAY 95 UNIT 30 BULLHEAD CITY AZ 86442




Newlifegames.com     Newlifegames.net     Newlifegames.org

Newlifegame.com     Newlifegame.net     Newlifegame.org    Newlifegames.us

   New Life Games     NewLifeGames  NLG

 We Bring new Life to old Games    1-888-NLG-SLOTS

Are all Copyright and Trademarks of New Life Games LLC 1992 - 2022


FAIR USE NOTICE:



This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml
If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.




The NewLifeGames.com website is optimized for use with Firefox and a minimum screen resolution of 1600 x 900 pixels.

SimplePortal 2.3.5 © 2008-2012, SimplePortal