New Life Games LLC

**Video Poker, Keno, Slots, 21** Gaming machines => CEI and Cal Omega Video Poker Games => Topic started by: SF22 on December 14, 2022, 08:13:08 PM

Title: Schematics and Manual for CEI/Cal-Omega/UCM with 911 MB and 906III GB
Post by: SF22 on December 14, 2022, 08:13:08 PM

Okay, I am trying to find a set of Schematics and a Manual for a CEI / Cal-Omega / United Coin Machine.  I have a 911 mother board and I have a 906 III gameboard.  My manual which is a “Casino Mini, Casino Poker Owner’s Manual Revision 26.6” talks about (2) two dip switches being on the gameboard and a few other settings my machine doesn’t seem to have.  My gameboard only has (1) one, dip switch.  I have attached a picture of my motherboard and gameboard and you can see it only has 1.  I guess I am looking for a schematic and a manual for this machine?  Any help would be most appreciated!!!

Any help would be most appreciated, thanks in advance!!!!

Title: Re: Schematics and Manual for CEI/Cal-Omega/UCM with 911 MB and 906III GB
Post by: shortrackskater on December 15, 2022, 09:37:42 AM

 :NLG_WELCOME:

What is the problem with your machine?

Consider becoming a contributing member (one time is fine as well) and you will get access to the NLG File System, which has manuals and schematics for many different games including your CEI.  :yes:
I did a screenshot showing what's available in the file system, and another of an earlier manual showing the dip-switch settings.

Title: Re: Schematics and Manual for CEI/Cal-Omega/UCM with 911 MB and 906III GB
Post by: SF22 on December 15, 2022, 07:30:26 PM

Great new everyone, (SOLVED)

I just wanted to post that I got this thing to work and let everyone know what I did to get it to work just in case someone else has this same problem someday down the road.   

Okay, so my problem was my coin part of the machine, it was not registering that a coin was being placed in the machine.  It was working in test mode and if I would manually hit “coin in” switch, it would sound the alarm and say “call the attendant”. From my standpoint it was working. The coin would do exactly what it should, except register that a coin was entered into the machine.  It would go to the coin hopper just as it should. 

Well with the help of another forum member I was led to the fact my machine was in "Time play" for tournaments.  I was able to get it switch out of time play and it works great now.  In normal play I can go into the learn mode and I have many more setting to adjust, which is great.  This machine works quite well, I am very please!!!

Any way quick answer is take it out of “Time play” and it will work as it should.  To take it out of time play you have to use the key on the side of the machine.

Thanks again for all your help!!!!