New Life Games LLC
News, Entertainment and Other RSS Feeds => Interesting Random Videos Found from Around the Internet. => Topic started by: Retro tech repair on September 26, 2020, 09:03:50 AM
-
When i finish building or fixing an s2000 or igame/game king i like to let it sit and auto play. I have got a lot of recommendations over the years to post videos of them online so here we go.
I have a lot of games in my shop that need work if there are any ideas you have for other videos let me know.
https://www.youtube.com/channel/UCfknyHtuJMb16s-8P3_K7jQ (https://www.youtube.com/channel/UCfknyHtuJMb16s-8P3_K7jQ)
-
Soooo.... how would I put a S2000 or GK into auto play???
-
You could just write small script on an arduino board or similar that just continually closes a switch at quick intervals, then wire it to the max bet button.
-
I don’t remember the wire colors on igame but for an s2000 bridge yellow brown and blue brown on the bet max/play x credits button. Your wire colors may be different but yellow and blue should stay the same. Be carful if you get the wrong wires you may blow your door io card. Your connecting the switched ground from the bulb to the detect line of the switch so when the game turns on the light its actually shorting the detect line to ground Making the game thing the button was pressed. No programing or board making needed.
-
Oh that's clever, didn't think of that. So what you are doing to trigger the sequence on your video is just closing the door latch! LOL.
-
Yep. You just have to be careful if you open the door with the reels still spinning you trigger a hard reel tilt but that can be cleared by turning the jackpot rest key with the door open. I should build a switch but im too lazy.
-
I just bridged it with a paper clip for now to see it go. Pretty cool. I'll make up something so I can control easier.