New Life Games LLC

TITO - Ticket in Ticket Out, Slot Toppers, Stands and Add-on Accessories => Slot Toppers => Topic started by: slotdoofus on October 17, 2016, 06:43:45 AM

Title: Bally S6000 topper?
Post by: slotdoofus on October 17, 2016, 06:43:45 AM

I went to install this topper on one of my Bally S6000 machines. It won't fit...the threaded rods on the bottom of the topper base are too far apart. I bought this topper thinking it would fit my S6000.

I guess I was wrong.

Title: Re: Bally S6000 topper?
Post by: Ken on October 17, 2016, 09:28:24 AM

What spacing do you need?

Title: Re: Bally S6000 topper?
Post by: slotdoofus on October 17, 2016, 09:44:19 AM

I need this topper to fit the stock candle holes that are in the cabinet, (1 1/4 inch apart).

The spacing between the threaded shafts on my topper is 1 3/4 apart.

Title: Re: Bally S6000 topper?
Post by: Jimise on October 17, 2016, 08:37:43 PM

You can get it to fit, just drill new holes for the topper.
That's what I did with my S6000.
I posted on the old site for help with installing mine.
Here is a link...

http://newlifegames.net/nlg/index.php?topic=7799.0 (http://newlifegames.net/nlg/index.php?topic=7799.0)

Good luck!

Title: Re: Bally S6000 topper?
Post by: Hamburger4378 on October 24, 2017, 04:12:11 AM

Any idea on the power supplies needed?

Title: Re: Bally S6000 topper?
Post by: slotdoofus on October 24, 2017, 04:30:43 AM

I ended up instally this topper on a S9000 machine.