New Life Games LLC

Bill Validators, Currency Acceptors and Printers => JCM DBV-45, DBV-145, and DBV-200 Bill Validators => Topic started by: GOS on October 25, 2016, 07:50:28 AM

Title: DBV200 - 16 MHZ BOARDS
Post by: GOS on October 25, 2016, 07:50:28 AM

i closed out another post that questioned dbv200 software/firmware issues.  I have a good working dbv200 - that works fine in a 10mhz game - when I try to use it in a game with a 16mhz board - the bills reject - some wait for a few seconds others immediate.  The 16mhz board has the SP1146 which is type 2 for 16mhz board and uses ID023.  Bill head has all bit swx OFF. Transport is good - bill box is good - all components work in other games - only fly in ointment 16 mhz cpu.  YES I have 10 mhz boards - would love to find a use for the 16 mhz boards i have.

Title: Re: DBV200 - 16 MHZ BOARDS
Post by: GOS on October 25, 2016, 01:16:44 PM

couldn't wait so I went ahead and used a 10mhz board and sp1274 for the haywire 2c - and voila - the bv works.  so there is a diff with or I have a problem 16mhz board.

Title: Re: DBV200 - 16 MHZ BOARDS
Post by: GOS on March 21, 2017, 10:39:59 AM

BUMP - Still get the same issue with 16mhz boards vs 10hmz with DBV200s -  this time i am using the SP1272 and bills cycle but reject.  use a 10mhz board same SS and SP1271 bills accept - the psr for the sp1272 only says ID023.