New Life Games LLC
**Video Poker, Keno, Slots, 21** Gaming machines => BALLY Game Maker => Topic started by: Nepa Coin Op on November 03, 2017, 06:55:01 PM
-
Did a batt change and a clear and now I get ..... "eprom memory failure"
What is that and how do I correct it ??
Thanks
-
Make sure the battery voltage is getting to the two RAM chips just above M0 and M1.
-
They both have juice ....
-
After you cleared it did you get the setup screen?
-
Yea after I go through all that it goes to the home screen then gives that error
-
When I clear one on our tester I usually turn on DIP switches 6,7, and 8.
How are you clearing yours?
-
7-8
Check out the other prob I have there's a thread I started about my touch probs
I'll try a 6/7/8 now
-
Same error with a 6/7/8 reset
-
The next step is to send the board to our shop so I can look at it with a scope and repair it.
Reply at klar.slotrepair@gmail.com