New Life Games LLC
**Video Poker, Keno, Slots, 21** Gaming machines => IGT PE and PE Plus Poker Games => Topic started by: trashman on December 04, 2017, 03:02:29 PM
-
the 1st one is a model 3770d made in 9/91 the other is model gd70c made in 10/93 the machines are video poker SEAT DOWN IGT MACHINE thank you :EmoticonHelp4:
-
Model numbers don't help much in determining the what type of machine it is. Post some pictures and I'm sure you'll get an answer.
-
Pictures can say a 1000 words... :Please_Post_Pictures_2: :thank_you:
-
will do after work today thank you
-
heres some pics
-
Those are P.E.+ machines.
-
sixcardmark beat me to it.
Also, it appears that both games are missing the main board and tray. Do you have those?
The boards would look similar to this one. This one is from an upright so, the orientation is different.
-
i pulled the boards do to the fact that both boards said low battery see attendant and the one game has a bad monitor or maybe a blown fuse.so now that i know what games they are i can find out after battery replaced the procedure to reset.thank you every one for your help
-
so what is the procedure to bring games back to life do i need reset chips.
i was told my machines are p.e. + machines.
dose anyone have a manual as to working on them p.s i dont care about making the bill accepters work .THANKS EVERYONE
-
The battery is soldered to the corner of the board. It's a 1/2 AA lithium battery. If you have a battery store near you like Battery Giant that we have here. They can solder the battery on the board if your not comfortable doing it your self. As for the no video out put one the one, more then likely your CRT Chassis is the problem.
-
You likely will not need any kind of reset chip after you put new batteries in, especially if you do not intend to enable the bill validators.
The exact steps depend on what (if any) error messages appear after you change the batteries, but to get past most of the error messages on a PE+ machine, open the door, press and hold the white self test button for about five seconds, then release it. Close the door (including the belly door under the armrest or the machine will not recognize the door as being closed), then turn and release the jackpot reset keyswitch once. If another error appears, open the door and repeat the process.
-
:thank_you: EVERYONE i let everyone know after i install battery's