New Life Games LLC

**Reel Slots** Gaming Machines => Bally Reel Games => Topic started by: Nepa Coin Op on December 17, 2017, 03:52:48 AM

Title: s6000 error 55 WONT clear
Post by: Nepa Coin Op on December 17, 2017, 03:52:48 AM

I have an s6000 here that I cant get a 55 error out of .........I have done a full ram clear a few times already and have front the can door sw jumped just  like I do on all others. (gray/bk-yel/red) and it just keeps coming back..... Ive tried jumping those 2 wires as well as all 3 ..... last ram clear I did 3 full clears in a row before putting chips back in and setting up. as soon as i set it up again on boot it cycles the bv and its disabled giving a 55....... wires from the can door sw go straight to the back plane so I dont see a prob with a sw daisy chained somewhere.... this is driving me nuts


any ideas ??


thanks

Title: Re: s6000 error 55 WONT clear
Post by: Nepa Coin Op on December 17, 2017, 04:52:53 AM

FIXED  i had to disable the ICB