New Life Games LLC
**Reel Slots** Gaming Machines => SIGMA Reel Games => Topic started by: Zeppelin on August 03, 2018, 10:25:41 AM
-
Hey Folks!
I picked up a Sigma SG-50b Smokin Sevens nickel machine recently and have been getting it in working order ever since. I can spin and insert the coins just fine. The hopper was in pieces (no knife or feeder inside) so have since waited a couple months for it from Rudy's so when I accidentally hit that pay out button it doesn't alarm out!
However the one thing I've been stumped on is when I try to insert a bill into the validator, it'll take in the bill, but get stuck on "B_Accepting" and won't clear without a power off reset. It seems there's some kind of problem with converting it to credits because when I insert the bill ($1, $5, $10, etc) with the corresponding number DIP switch on the bottom of the validator on, it'll eject it. As in if DIP Switch one is on under the reader it'll eject $1 bills, take another size bill, then get stuck on b_accepting. Prompting me to power off the machine and back on again.
I haven't really seen much online about this problem so thank you in advance if you have had any experience with this!
-
Welcome to NLG! :wave: :waving_flag:
Rudy's has had some delays in filling orders this year and many folks have had some problems. Their website doesn't get updated much anymore so it may show items for sale that they no longer have. You may want to contact them to see what the status of your order is. If it has been a few weeks might be best to cancel and get your parts elsewhere.
I'm not familiar with Sigma machines but hopefully others here will have some helpful ideas. You may want to tell us what model of bill validator you have, in case someone needs to know that. Many bill validators have a dipswitch so you can tell it to accept or not accept a particular bill. Normally you would have it set to accept all bill denominations.
Is this bill validator the original one that came with the machine, or do you think someone added it and tried to get it working? Could it be a model or version not compatible with this machine? Also, if the bill validator is an older model it may contain internal software that no longer works with the new-design bills we have in circulation now. When troubleshooting a bill validator problem it is best to only use $1 bills (in good condition), they are always accepted on a working bill validator no matter how old its software is.
Until you get the hopper working you might be able to disconnect one wire from the Cashout button switch to prevent it from causing the hopper to activate and try to payout coins.
Post as many photos as you want to, that may help others here to see or think of something to help. In particular, a photo showing the entire front of the machine helps to make sure we know what model it is.