New Life Games LLC
**Reel Slots** Gaming Machines => IGT S and S-plus Reel Games => Topic started by: billsumm on August 29, 2020, 02:48:27 PM
-
I am new, so this is my first question. Bought a non working IGT S+ Sizzling 7's, it came up with a 12, so I have a battery on order. Meanwhile I am checking other issues, like the LED is not lit on the 24v CC-16 coin comparitor. The 6 pin connector had broken solder connections which I repaired and replaced a burnt but not bad 100 ohm resistor. Voltage at pin 6 and 4 is 26 volts unplugged at the connector, but dead when plugged into the board. (PEM-46 Rev B). Looking for a schematic for this board, tried NLG File system, but not allowed access. Any help would be appreciated.
-
The led will only light when the door is closed.
-
Thanks, also does not come on with the door closed.
-
How are you closing the door? Then still seeing the LED?
-
Thank you for the schematic, I am seeing the state of the LED with the door closed by placing my phone inside on video mode.
-
Those LED's can go bad.