**Reel Slots** Gaming Machines > IGT Reel Touch Games |
I O Self Test Processor Low Battery 1 2 |
(1/2) > >> |
Tom1969:
Hi, during the SelfTest Processor I/O there are two Battery Low mentioned… Which one is Battery 1 an 2 and which Voltage they should have ? Is there also a possibility to check the one in the Top Box and which Voltage it should have… Thank you already for any hint.. And Happy Eastern Tom |
qbert:
Don't think you are talking about a Reel Touch machine. What machine do you have? |
Tom1969:
Hi yes it’s a Reel Touch…See pics |
qbert:
Tom, OK yes now I see where you are. That is not telling you that you have a low battery. You should only have the coin battery on the MPU it should be above 2.9V Hopefully you have already removed the varta battery, 500 series or 1270. Battery 2 is not for the one in the top box. Are you having a specific problem? Is the VFD indicating a low battery? If it is you need to change the coin battery on the lower cpu. If the top box battery goes bad and it is a bios 2 top box you will get an indication on the top box boot screen about cpu speed has changed. Bios 1 can run with a dead top box battery. Rich |
Tom1969:
Thank you for the quick reply… I have no issue was just scared by the self test message.. I will check my BIOS if a Battery is needed Have a good day Tom |
Navigation |
Message Index |
Next page |
Cell Phone and Pad Mode imode wap wap2 |
NLG Archives Archives @ newlifegames.net Wayback Machine |
Contact Us NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442 |