| **Reel Slots** Gaming Machines > SIGMA Reel Games |
| Sigma W4312 RAM ERROR |
| (1/7) > >> |
| TobyOcc:
I have just got in a Sigma slot and am getting a RAM error. I am a arcade guy so this is new to me. Any help would be great. Thanks. Toby |
| metex:
Hi,try cleaning the pins, or maybe the ram chip is bad so replace it. This is what i usually do about ram error. With other machine sometimes the power supply causes this error, check the +5 volt. |
| TobyOcc:
Ok so I pulled the reels and the boards on the back show the right 2 board led on the last one on the right led is off. Any help there? Toby |
| metex:
I Will reply you later i must go See you |
| metex:
Hi,use a digital voltmeter, locate the power supply unit,you will see some indications at the output section, +5v,+12v,-12v... Check the outputs If you cannot do that, post photos of boards |
| Navigation |
| Message Index |
| Next page |
|
Cell Phone and Pad Mode imode wap wap2 |
NLG Archives Archives @ newlifegames.net Wayback Machine |
Contact Us NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442 |