| **Reel Slots** Gaming Machines > Bally Reel Games |
| Bally Monte Carlo stuck on code 91-0 (solved) |
| (1/5) > >> |
| Haywire Slots:
Hey everyone. My MC is giving me a hard time. I installed the 2 rechargeable aaa battery holder setup on the progressive board, then programmed it using directions found on the old site, did a full clear & set everything up under 11d. Now I am stuck with the 91-0 code. Not sure what I did wrong. Any help would be greatly appreciated. My 11d settings are as follows: 9 = 4 2 = 4 7 = 1 56 = 0 51 = 9999 58 = 1000 78lo = 1 73 = 0 61 = 1 81 = 0 Cham2 settings are as follows: F3 = SNGL F4 = M08 F5 = 3sec F6 = JPO F7 = $$$ F8 = MS00 Jackpot Programming: Base = 250.00 Current jp = 769.25 Hidden jp = 000.00 Jp limit = 999.999.99 Increment 1 = 10.000.00 Increment 2 = 000.00 Used padded buttons to select SA mode |
| Haywire Slots:
I think I found the problem, the wiring seems to be wrong. I have wires running from J6 on the controller to J13 on the backplane, There is a wire connected to J14 but it is not connected to anything. I believe it is suppose to go from J7 on the controller to J13 & J14. My question at this point is - does anyone have a wiring diagram so I can make a harness to hook this all up? Thank you. |
| Haywire Slots:
Got the harness all set up, the machine is now working :D . The progressive amount is not changing as I play the game. Any Ideas? |
| LINDAM:
You are still lacking communication between the machine and the progressive unit. #2 in 11d menu ....some machine like 0004 and some like 0005. I have several and it's about 50/50 as to 4 or 5 |
| stormrider:
In Bally 11d menu you need to set 78lo=1 not 79lo 91 Error comes down to this: Bally 11d menu #2 Select 4 IF USING J14 serial return from J7 Select 5 not connecting to J14 Tim |
| Navigation |
| Message Index |
| Next page |
|
Cell Phone and Pad Mode imode wap wap2 |
NLG Archives Archives @ newlifegames.net Wayback Machine |
Contact Us NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442 |