New Life Games LLC
Bill Validators, Currency Acceptors and Printers => JCM WBA 10, 11, 12, 13, 14, 20, 21, 22, and 23 Bill Validators => Topic started by: Badbaud on July 08, 2016, 10:13:28 PM
-
Does anyone have a schematic for the JCM tools software cable that will let me program WBA 12/13 via the serial port of my computer?
-
You need the JCM rs-232 converter since the wba is not rs-232. The "power supply" that jcm used for the pc interface has the rs-232 board built-in. I never go around to testing if the side rs-232 board used on the bally machines would work as well. You also need to provide +12v power to the bv.
-
Thanks, found someone locally that sold the complete setup. Still going to tear it apart and try to get a schematic made.