New Life Games LLC

**Reel Slots** Gaming Machines => IGT S-AVP (REEL SLOTS ONLY, NO VIDEO) => Topic started by: Slotsmanlucky on August 10, 2017, 06:47:15 PM

Title: Enable Printer SMLD Machine
Post by: Slotsmanlucky on August 10, 2017, 06:47:15 PM

 I need some help I purchased a printer for my SMLD machine and  I have keyed but can't printer enable.   When I key machine, printer doesn't give me option to enable.   I sure would like to get printer working so I can buy a TITO system from Jim for it.


Any help would be appreciated!


Thanks,  Richard

Title: Re: Enable Printer SMLD Machine
Post by: 777sizzler on August 11, 2017, 11:14:34 AM

Richard,  Assuming that you have at least a 3.0 brain box and that you have A10114A09 operating sys. with AVPSB014B boot chips try the following.
Make sure there are No credits on machine
Intall e-Key 7
Select Set-up then Communication, Protocol
From my memory Port should read Comm1 and Adress -Adress 1
Hit next
Change serial to SAS1,  Hit Advanced and select Standard (For tito you use System)
Hit OK -Save and exit


Also in main device set up printer must be enabled.


Hope this helps B.


One more thing if it's a older operating system and boots other than what I stated other methods have to be used to set it up

Title: Re: Enable Printer SMLD Machine
Post by: Slotsmanlucky on August 12, 2017, 09:54:01 AM

Barry, thanks for of your help!


Richard

Title: Re: Enable Printer SMLD Machine
Post by: Slotsmanlucky on August 13, 2017, 02:19:05 PM

Barry, thanks for all of your help helping me getting my printer working, printer works great.   You when above and beyond helping figure out how to setup the printer!


Thanks Again!  :thank_you:


Richard

Title: Re: Enable Printer SMLD Machine
Post by: 777sizzler on August 13, 2017, 03:02:50 PM

Richard,  You are welcome.  You got a complete rig and had questions so I helped-It's what I do.  B.

Title: Re: Enable Printer SMLD Machine
Post by: Slotsmanlucky on September 10, 2017, 06:22:00 PM

I just purchased another printer for my AVP 3.0 machine from Barry work great!


Thanks, Barry