New Life Games LLC

**Reel Slots** Gaming Machines => IGT S and S-plus Reel Games => Topic started by: 65ImpalaSS on September 04, 2017, 05:06:17 PM

Title: IGT S (not +) change light not working
Post by: 65ImpalaSS on September 04, 2017, 05:06:17 PM

Hey guys,

I've had this machine for several years and it works flawlessly.  However, I have a small, but annoying problem.  My change light does not work.  My IGT S (not +) has a candle with two lights.  The bottom one flashes when the door has been opened.  I assumed the top one flashes when the orange change button has been pushed.

I have checked the button itself and the light bulb, both check out ok.  Any thoughts before I start digging into this one...?  Thanks in advance.

Jeff

Title: Re: IGT S (not +) change light not working
Post by: rokgpsman on September 04, 2017, 06:58:44 PM

Have you looked at the wiring underneath that connects to the change button switch, see if a wire has been disconnected or slipped off?

Title: Re: IGT S (not +) change light not working
Post by: 65ImpalaSS on September 05, 2017, 04:43:17 PM

Yes, I removed the wiring to check the continuity of the switch.  Nothing looks out of place...

Title: Re: IGT S (not +) change light not working
Post by: rokgpsman on September 05, 2017, 05:06:31 PM

Did you look in the top box area of the machine, make sure the candle wiring cable is connected completely, and that none of the wires are broken or connector pins bent/broken/pushed back? Also, there could be a broken wire inside the candle that connects to the socket for the "change/attention needed" light.