New Life Games LLC

Bill Validators, Currency Acceptors and Printers => JCM WBA 10, 11, 12, 13, 14, 20, 21, 22, and 23 Bill Validators => Topic started by: travishauch on October 24, 2017, 02:08:48 PM

Title: WBA-13 fails initial startup. Unsure how to proceed.
Post by: travishauch on October 24, 2017, 02:08:48 PM

Hi. I have a problem with a WBA-13-SS in an IGT S2000. When I first turn it on, the bill validator has two red leds come on and then starts spinning like it's rejecting a bill. It does it about 8-10 times with a split second pause in between (spinning same way each time, reject/exit) and then stops. On the IGT display I get "Bill Validator Jam."


I bought the machine used not working. It had RAM error and EEPROM error. I just had to cycle the key as guides say to do and got it working. The bill validator didn't work however but after going into I/O devices and auto configure netplex devices and it started to work. The next day it stopped working again and I have been unsuccessful.


Any ideas?


Thanks,
Travis

Title: Re: WBA-13 fails initial startup. Unsure how to proceed.
Post by: rickhunter on October 24, 2017, 02:16:51 PM

Pull validator and cash can out and look for broken gears or something jamped in the mechanism.

Title: Re: WBA-13 fails initial startup. Unsure how to proceed.
Post by: travishauch on October 24, 2017, 03:12:37 PM

Quote from: rickhunter on October 24, 2017, 02:16:51 PM

Pull validator and cash can out and look for broken gears or something jamped in the mechanism.

I don't see any jam or broken gears. It's weird. Just was working yesterday, even though it did the same thing before it started working.