New Life Games LLC
**Video Poker, Keno, Slots, 21** Gaming machines => WMS Williams Video => Topic started by: wel728 on February 04, 2018, 04:15:24 AM
-
Does any body now how to get the work light in side a BB2 to light up? Mine does not work.
Thanks
-
The obvious is did you replace the bulb?
-
No I did not ( I do not know where it is ?? )
-
Is the light the black box on the bottom right of the Cab. ??
-
Yes
-
What turns it on?
-
120v ac, when you open the door, it should turn on.
-
When I open door it does not turn on. I replaced it with a different one and same thing. Do you know where switch is for this ? What powers it ?
-
I will have to go take mine apart to see what makes it go. I will port results tonight.
-
Thanks this is a stumper
-
It may be a board like an I/O board that switches the light on and off, based on the machine sensing the door open with the normal door security switch. So the light may not be controlled directly by a light switch. Is anything else with the machine not working properly?
-
No everything else is working fine. Is there a way to test the light?
-
Ok, the light is powered by ac 120v from the p3 connector on the power supply. The switch is like caged like 1/4 of the way down on the right side of the main monitor. There is a corresponding “tab†on the door that presses the switch as the door closes.
-
I should interject the BB2 upright inside lights are rubbish, less than 50% are functional at work. I really haven't sat and diagnosed the light modules, that's not my thing. It's some LED and driver circuit in the box, it's not just-a-bulb.
-
Thanks guys for your help. I guess I will keep my flash light charged.
-
Update I have it working, The switch 1/4 of the way down on the right was stuck in. just moved it and now we are working.
Thanks