New Life Games LLC

**Reel Slots** Gaming Machines => Other Reel Games => Topic started by: joedsr on May 02, 2020, 06:42:48 PM

Title: jennings slot - hopper issue
Post by: joedsr on May 02, 2020, 06:42:48 PM

need support for a jennings slot machine


just bought it from a neighbor that needed to make ends meet given current mess we are experiencing with covid
resolved "call attendant" issue on payouts with help from a youtube video, so game works :dancing_2:


current issue is quarters getting jammed when exiting coin hopper.


can someone help?


thanks


joe d

Title: Re: jennings slot
Post by: shortrackskater on May 03, 2020, 08:31:39 AM

 :NLG_WELCOME:

Can you please post a photo of your machine and of the hopper as well.

Title: Re: jennings slot - hopper issue
Post by: joedsr on May 03, 2020, 12:06:43 PM

see attached photos of machine and hopper ...

Title: Re: jennings slot - hopper issue
Post by: shortrackskater on May 03, 2020, 01:56:57 PM

Thanks and hang on...

Also for the future, if you can, please just add photos as a JPEG file, as other members may not be able to open it.  My MacBook tried to open it as a text document and just showed an empty field. I took a screen shot, then cropped each one, flipped them and created separate jpeg files.
It's fun to be a moderator.
Anyway hold on, help is on the way.
If you could post a higher resolution shot of the hopper that would be great.

Title: Re: jennings slot - hopper issue
Post by: Badbaud on May 03, 2020, 02:19:21 PM

Wonder if your knife is bent away from the shelf wheel.

Title: Re: jennings slot - hopper issue
Post by: Amechanic on May 03, 2020, 02:50:57 PM

I can’t tell by this pic? I don’t see a current jam? Might also have to adjust the wipe to keep only one coin per slot on the coin wheel.
I would remove the hopper knife to see if anything is jammed under it.

Title: Re: jennings slot - hopper issue
Post by: joedsr on May 04, 2020, 12:50:56 PM

sorry that my last post was not thorough.  I cleared the jam - multiple coins in outlet cover.  knife is clear and does not appear to be out of alignment.   wondering if it has something to do with the wiper - guessing that more than one coin is entering outlet at the same time.


odd thing is that jams occur intermittently.  some times 50 coin payout occurs without a jam.  other time it may be a 7 coin payout getting jammed.


seems I need a go pro camera inside to see what happens :lol:


also, do you know of a service provider that can work on the mother board; i.e. run diagnostics or modify payouts?

Title: Re: jennings slot - hopper issue
Post by: Amechanic on May 04, 2020, 01:04:03 PM

Start by adjusting the wipe closer to the coin wheel. Loosen the two screws holding it. Then adjust it down and tighten. You don’t want it touching the coin, but as close as possible. If the knife isn’t sitting flat to the coin wheel, you might be able to remove it and straighten it.

Title: Re: jennings slot - hopper issue
Post by: Amechanic on May 04, 2020, 01:06:34 PM

Oh I forgot. You could contact K-Lar to see if any thing could be done to the MPU. You can find K-Lar on the home page at the top.

Title: Re: jennings slot - hopper issue
Post by: ramegoom on May 06, 2020, 05:38:12 AM

Let me know if you need hoppers, power supplies, coin mechs, or other parts for the J400 machine. I have a ton of parts.