New Life Games LLC

Bill Validators, Currency Acceptors and Printers => JCM WBA 10, 11, 12, 13, 14, 20, 21, 22, and 23 Bill Validators => Topic started by: captmatt on November 23, 2020, 10:33:59 AM

Title: Want to upgrade to WBA from DBV-45
Post by: captmatt on November 23, 2020, 10:33:59 AM

Hi


Looking to upgrade the bill acceptor on an old s-plus (SP 1160/SS 4133, manufactured 1993).  Would someone be willing to tell me what I need?  Looking for one that will accept as many new bills as possible.


Thanks.

Title: Re: Want to upgrade to WBA from DBV-45
Post by: Harvs on November 23, 2020, 12:22:48 PM

Quote from: captmatt on November 23, 2020, 10:33:59 AM

Hi


Looking to upgrade the bill acceptor on an old s-plus (SP 1160/SS 4133, manufactured 1993).  Would someone be willing to tell me what I need?  Looking for one that will accept as many new bills as possible.


Thanks.

You'll need a few things and may have to cut your housing to fit this WBA setup.. Someone here like Midwest Jim may have all needed but if not...

http://www.spininc.com/bv-assembly-jcm-wba-13-us-currency-e-prom-with-cash-box-and-frame-no-harness (http://www.spininc.com/bv-assembly-jcm-wba-13-us-currency-e-prom-with-cash-box-and-frame-no-harness)

http://www.spininc.com/harness-transport-jcm-wba-uba-igt (http://www.spininc.com/harness-transport-jcm-wba-uba-igt)

http://www.spininc.com/02969-1 (http://www.spininc.com/02969-1)

You'll also need a WBA power supply and you'll need a door bezel or you can cut the back of yours to fit the WBA duckbill.