New Life Games LLC
**Reel Slots** Gaming Machines => IGT S2000 and Vision Games => Topic started by: bud0143 on December 05, 2020, 07:07:02 AM
-
I would like to change my display from first pic to second pic is it possible? What do I need to make it happen thanks
-
If you want to split the screen then you need a different version chip.
-
Use VS011GX1 or jurisdictional equivalent. Some older SG chips may also need to be replaced.
-
i know just a little about what chip is where. where do i look?
-
They are between the SB chip and version.
They are end to end. Will have SG with a number.
-
MPU VS chip U24, GM 1 & 2 U19, U46
-
Ok I added pictures of mpu’s
-
I see them now in the first post. The one with 362s will work. Can't see the other.
-
the other one is sg000200
-
320x240 sized photos is too small to see the letters on the chips...make the photos where at least one side of the photo is 1000Kb
-
I would move the SG362 chips from the 1270 enhanced MPU to the 50X or use 363s if you have any. You probably get reel tilts at boot up now using them on the 1270. Use SG000523 or SG000598 on the 1270. You will likely have to key chip them when you make the swap. Use VS011GX1 on both for the split screen VFD & multi denom capabilities if desired.