New Life Games LLC

**Video Poker, Keno, Slots, 21** Gaming machines => WMS Williams Video => Topic started by: joel.smith@charter.net on May 26, 2021, 11:50:32 AM

Title: WMS BB1 button wiring
Post by: joel.smith@charter.net on May 26, 2021, 11:50:32 AM

Got a TITO for WMS BB1 and it is set up to add $20 credit when "Change" button is pressed. But when I checked the change button it is not connected just the wires there....so anyway... have a extra reset key switch ....can anyone tell me which wires to connect to reset switch so when key is turned it will act as "Change" button was pushed. Thanks

Title: Re: WMS BB1 button wiring
Post by: rickhunter on May 26, 2021, 12:02:32 PM

you don't have a change button?  Or is it just unplugged?  Why do you need the key switch?  If you follow the wiring scheme for the other buttons, it is the same for the service/button.  One set is for the lights, the other set is for the switch, just look at the other buttons and see which ones are connected to the switch part.

Title: Re: WMS BB1 button wiring
Post by: joel.smith@charter.net on May 26, 2021, 12:35:28 PM

I want it on a key switch so when the kids play it they don't keep pushing the service button and add $5000 of credits