New Life Games LLC

TITO - Ticket in Ticket Out, Slot Toppers, Stands and Add-on Accessories => Slot Toppers => Topic started by: Stuart4786$ on June 29, 2023, 12:00:41 AM

Title: Game King 3902 to 6.4 044 Conversion
Post by: Stuart4786$ on June 29, 2023, 12:00:41 AM: I Recently Purchased a 044 board and back plane with a with a 039 boot chip on super star flashboard. Put the new flashboard in, connected all the connectors, double checked to make sure all the plugs and socket numbers matched. I wore gloves and a ground strap to make sure i dont static shock my new board. I powered up the machine and all the lights came on, The bill validator made its usual noises. The LCD screen showed INITIALYZING but very faint. I could barely see it. I never changed or booted up. On the CPU there were 5 anber lights and 2 green lights. I took out the new boar and put in all the old 3902 stuff. It worked fine. I put the 044 board back in. Same. Still not working

Anyone have any idea whats going on???
Title: Re: Game King 3902 to 6.4 044 Conversion
Post by: Yoeddy1 on June 29, 2023, 01:22:03 AM: You need a Key 28 chip for the 044 board. Key 40 chip is used for the 3902 board.

Check with RB…he’ll get you fixed up.

Thanks,
Jason
Title: Re: Game King 3902 to 6.4 044 Conversion
Post by: RB on June 29, 2023, 04:16:29 AM: The clear and key features are built into the 039 chip. Sounds like you need to change the monitor setting from 039 to 044. Some Ceronix monitors have a jumper for that.
Title: Re: Game King 3902 to 6.4 044 Conversion
Post by: Stuart4786$ on June 29, 2023, 04:51:01 AM: I have a ceronix monitor. How do i make it work for the 044 board
Title: Re: Game King 3902 to 6.4 044 Conversion
Post by: sixcardmark on June 29, 2023, 05:21:37 AM: Quote from: Stuart4786$ on June 29, 2023, 04:51:01 AM
I have a ceronix monitor. How do i make it work for the 044 board
First remove the two screws holding the back cover and remove cover from the LCD. In front of the Analog connector is the word Video. Between that word and the plug is a small 2 pin black plastic jumper that needs to be removed. This jumper is to open up the video for the 044 board.
Title: Re: Game King 3902 to 6.4 044 Conversion
Post by: RB on June 29, 2023, 05:33:41 AM: Turn off DSA and SHA checks in options as described in the pdf attached to reply #3 when you are setting it up.
Title: Re: Game King 3902 to 6.4 044 Conversion
Post by: Stuart4786$ on June 29, 2023, 09:08:38 AM: Got it all working but forgot to set up the tito so i had to start all over again. Now when i turn it on while holding the reset button, the screen is blank and wont go into the setup menu. So frustrating
Title: Re: Game King 3902 to 6.4 044 Conversion
Post by: rickhunter on June 29, 2023, 06:49:43 PM: Check to make sure all the pins on the keychip are inserted properly, also make sure the orientation on the chip is correct.