TITO - Ticket in Ticket Out, Slot Toppers, Stands and Add-on Accessories > Bettor Slots TITO - Ticket in Ticket Out
TITO for WBS BB2 install problems
Maxpay72:
First of all thanks for the help! I purchased a TITO board and have installed it per the instructions. Unfortunately when I insert money like the final step says and try to cash out a voucher it hand pays to the screen. I’m a noobie at this. I have a BB2 with a printer and a bill MARS bill collector. Thanks
rickhunter:
sounds like you have com issues with the tito board, are you able to print a test ticket in the diagnostic menu screen?
Maxpay72:
Ya.. that’s what doesn’t make sense. I can print a void voucher in the diagnostic screen.
rickhunter:
The com port you are using might be bad or the cable to the tito board is not correct. Whenever you get handpay after a cashout it's because it cannot connect to the validation system. If you setup the game with standard validation, the system should print a ticket, it just won't take it back in. The fact that you can print a VOID ticket just means the printer is correctly connected to your cabinet. The entire sequence for cashing out on a TITO system starts by polling the SAS host (in this case the TITO board) for cashout validation, which then generates a barcode number with then gets sent to the printer. If the SAS host does not repond in a timely manner, it goes to handpay. So your issue is a TITO board problem. Have you contacted the manufacturer of the TITO board for assistance?
Maxpay72:
I will send an e-mail to Gamblers Oasis. Thanks for the help!
Navigation
[0] Message Index
[#] Next page
Cell Phone and Pad Mode imode wap wap2 |
NLG Archives Archives @ newlifegames.net Wayback Machine |
Contact Us NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442 |