New Life Games LLC
Monitor Repair Log and Database. **Arcade and Gaming** => LCD and CRT Monitor Repair Tech Support => Topic started by: lightfoot on May 05, 2021, 02:40:45 PM
-
I have An Aristocrat MK6 "Flames of Olympus" that I would like to convert to a lcd or similar monitor. Currently it has a WG 19" monitor which works, but has burnt in images. Is there a "how to" or a kit that I need in order to do this conversion? Any help would be greatly appreciated. Also, not really concerned with keeping the touch screen active unless it is necessary
-
I believe if you go to the Ceronix website, they should have a complete drop in LCD Kit for your machine. They usually come with a matching Bezel as well.
Should be an easy swap, plug and play, just be prepared for sticker shock. Lol.
Curtis ash100
-
thank you
-
I got the lcd working using a rgb to vga coversion kit that i purchased from Amazon.
Now the problem is that there is a touch screen communication error and I can not get rid of. Any suggestions?
-
Does your LCD have a touchscreen?
-
no, it is just a lcd computer monitor and I dont necessarily need touch screen options
-
Did you set the touchscreen as “none†in the setup?
-
have not seen that as an option to set touchscreen to none
-
I think the point he is trying to make is that if you put a non touch screen LCD in the game, it will come up with a touch screen disconnect error, unless you disable the touch screen in the machine options menu, under device driver settings.
-
Exactly
-
So, what you are saying is that there should be a way to disable the touchscreen?
-
Got it going. Thank you for all of your help :applause: :applause: :cool_thumb_up: :cool_thumb_up: