New Life Games LLC
**Reel Slots** Gaming Machines => IGT S2000 and Vision Games => Topic started by: Nepa Coin Op on August 05, 2022, 01:39:18 PM
-
I know this topic has been covered a bunch of times on the 502/504 boards. I have a machine here running a 1270 boards setup. Machine boots plays and sometimes after a bit it will say door open MB, until then the door switches work fine , when it freezes up like that that only way around it is to reboot it. Then it will be good for 5-10-15 mins who knows. The door optics on it were already bypassed, IO boards swapped, is there a way to completely bypass the door circuitry on the 1270 like you can on the 504s?? Ive done it on the 504s already and just put a toggle switch on the board and prob was solved for good. Any input is appreciated
Thanks