New Life Games LLC
General NLG Chat => General Chat, Slot Shop **Tech Talk** Welcome wagon and other stuff. (Off-Topic Post Welcome) => Topic started by: Bjz112887 on June 02, 2015, 07:49:16 PM
-
Hey y'all,
I wanted to get a dolly cart made for slots. The ones that you can put up to the table and jack it up and just move it on. Does anyone know where I can get one of them at?
Thanks
-
Harbor Freight carries them.
-
Anybody have a link or pic of one? I, and my back, would like to get one too after manually hoisting these things up onto stands for the past few years.
Thanks,
Jason
-
The yellow one at Harbor Freight works really well and is good for 500lbs
-
Yah, here's the 1,000 version link...
http://t.harborfreight.com/1000-lbs-capacity-hydraulic-table-cart-69148.html (http://t.harborfreight.com/1000-lbs-capacity-hydraulic-table-cart-69148.html)
-
Most people use a variant of this, the problem is if the slot is at floor level, you still have to get it to the platform. The advantage is once it is on the "table" you can just leave it there and work on it. I have one of these, I just tilt the machine and slide it into the platform. I put the cart against a wall, so it doesn't move around as I'm tilting the machine into place.
http://www.harborfreight.com/500-lb-capacity-hydraulic-table-cart-60730-10041.html (http://www.harborfreight.com/500-lb-capacity-hydraulic-table-cart-60730-10041.html)
These can lift from floor level, but you cannot work on it since you have to tilt it. Optimally, you get one of each? :propeller: :propeller:
http://www.industrialsupplies.com/material-handling/stackers-lift-trucks/d-90759-90759-191399 (http://www.industrialsupplies.com/material-handling/stackers-lift-trucks/d-90759-90759-191399)
-
We use hydraulic lifts with a 20"x24" table/skid? Pump it up with your leg like a barber chair. Goes to about 60" high? Great workout for the legs, lol.
-
FYI: You don't want one with the rubber pad on top. It makes it very hard to position the machine on the table or push it on and off a stand. A smooth metal top is the best. ( my opinion )
-
How do You get a slot machine up stairs (13 steps)!
-
An appliance dolly.
-
An appliance dolly, and at least one good helper. You don't want to loose it.
-
Any suggestions on an appliance dolly?
-
Lots of hardware stores rent them pretty cheap. I have my own and it works good for stairs.
-
If you have a price of heavy cardboard, you can slide it up the stairs on its back. Just takes 2 guys (well, or 1 depending on the muscle) at the bottom. Grab the machine by the coin tray or bottom of door and get after it.
-
Harbour Freight has them for under $50.00. The easiest to use have Pneumatic (air) tires.
-
Here is a coupon link. Bottom right coupon.
http://widgets.harborfreight.com/wswidgets/common/displayCoupon.do?main=true&hdr=mag&week=more_coupons&campaign=weekly&page=more_coupons.html&cust=60500244716&keycode=1031&utm_medium=email&utm_campaign=2615c&utm_source=1031&cid=mEmail_s1031_c2615c (http://widgets.harborfreight.com/wswidgets/common/displayCoupon.do?main=true&hdr=mag&week=more_coupons&campaign=weekly&page=more_coupons.html&cust=60500244716&keycode=1031&utm_medium=email&utm_campaign=2615c&utm_source=1031&cid=mEmail_s1031_c2615c)
and their apl. dolly
http://www.harborfreight.com/catalogsearch/result?q=dolly (http://www.harborfreight.com/catalogsearch/result?q=dolly)
Richard
Afterthought: Not near a HF store. Shipping only $6.99 I believe. Sent me a mid size generator from South Carolina for $6.99(I on west coast). I would think it is the shipping rate for entire USA, but don't know.