Schematic Needed for GameMaker

[JethroP]

I just acquired my first Video poker machine.  The MPU is AS-3356-246 and is very corroded around the battery.  Is there a schematic and parts list available so that I might try to repair this board?

[Slotman69]

Hey, did you manage to repair the board? I have a V7000 GameMaker that has been storage for 12/13 years, battery has leaked and corroded so that corner of the board is in a need of repair, looks like I need to replace a bunch of resistors and a couple of capacitors. Did you get a schematic or good photos of a working board?


Cheers
Gary

[JethroP]

No...I still have the old corroded board.  Same as you.  Still could use a schematic and board layout.

[Badbaud]

First douse with 50% white vinegar and 50% distilled water, rinse and repeat until all acid is gone.

[JethroP]

First douse with 50% white vinegar and 50% distilled water, rinse and repeat until all acid is gone.

I did that long ago.  The problem is I need a schematic and board layout to repopulate the destroyed parts.

[Tilt]

I think this is what you're looking for.

[JethroP]

I think this is what you're looking for.

Thank you.  I think that is it.  That machine is on the back burner for now, but will look into fixing it in the coming months.

[Slotman69]

The schematic is exactly what I needed, about to order the resistors and capacitors to replace, thanks a lot, much appreciated.
Gary

[Tilt]

Glad to help.  I hope you're able to get it working again