New Life Games LLC
**Reel Slots** Gaming Machines => WMS Reel Games => Topic started by: coolwavepic on June 07, 2015, 12:11:24 PM
-
Does anyone know if the fan on the reel controller can be purchased at an electronic store or is the moles different. Also what size do I need?
-
It should be a standard type fan, just look up the voltage and amp draw and match it. You will probably have to put a molex plug on it, but that's not a big deal. Does your reel controller not have a fan installed?
-
Yeah any fan with the correct specs and size should work. Just remove the old one and start searching online for a replacement. Don't worry too much about the plug. Most fans are 2 wires unless it has a sense and then it's 3. You can just cut the old harness and tie the wires to the new fan. If you do have 3 wires on that harness, the sense is required. Make sure you get one with the 3rd wire if so.