New Life Games LLC
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length

News:

Welcome to the NewLifeGames.com message forum! 

 


NLG Site Navigation Menu


Archives of old posts can be found at...... Newlifegames.net/nlg/

Author Topic: Bally 809 5 coin multiplier  (Read 39671 times)

0 Members and 1 Guest are viewing this topic.

Offline Tat2Dave

  • NLG Member 101 to 250 Posts
  • ***
  • Posts: 129
  • Reputation Power: 7
  • Tat2Dave New User has no influence.
  • Gender: Male
  • NLG
Bally 809 5 coin multiplier
« on: August 25, 2018, 09:22:48 PM »
Can someone please tell me where this loose wire goes to? the only light that works on my slot machine is the fluorescent tube, none of the other lights work, tried using a jumper wire but no luck.

Offline Amechanic

  • In Remembrance of our lost NLG Members
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 4657
  • Reputation Power: 306
  • Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!
  • Gender: Male
  • NLG
Re: Bally 809 5 coin multiplier
« Reply #1 on: August 25, 2018, 09:30:54 PM »
Can’t tell much with the coin mech still installed. My guess it was attached to a door screw or one there holding the coin mech housing to the door. Check your fuses located on the back wall behind the hopper. I wouldn’t attach the wire until you checked it for power. Could be why your lights don’t work.
Please remember to make a donation to NLG for mine/our help in repairing your machines problem.. Your donations help keep this site on line.
And remember...
If it's jammed, force it.. If it breaks, it needed to be replaced anyways...

Offline DavidLee

  • Sr NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 1702
  • Reputation Power: 127
  • DavidLee Is an-NLG GOD!DavidLee Is an-NLG GOD!DavidLee Is an-NLG GOD!DavidLee Is an-NLG GOD!DavidLee Is an-NLG GOD!DavidLee Is an-NLG GOD!DavidLee Is an-NLG GOD!DavidLee Is an-NLG GOD!DavidLee Is an-NLG GOD!DavidLee Is an-NLG GOD!DavidLee Is an-NLG GOD!DavidLee Is an-NLG GOD!
  • Gender: Male
  • NLG
Re: Bally 809 5 coin multiplier
« Reply #2 on: August 28, 2018, 09:15:42 AM »
I've seen machine that had a wire from the lock out coil grounded to the door/case. Not sure what for and why it didn't blow a fuse.
All 6 volt lights are out check the fuse and the wire related to the fuse holder.
If its just the door lights check the white molex plugs near the door hinge.
Moving the wires and pushing the molex plug and socket together sometimes solves problems on the door.

Use caution as there is 110 volts running the fluorescent light transformers.   

Offline rdaniel

  • NLG Member 251 to 500 Posts
  • ****
  • Posts: 313
  • Reputation Power: 27
  • rdaniel New User barely matters.rdaniel New User barely matters.
  • Gender: Male
  • NLG
Re: Bally 809 5 coin multiplier
« Reply #3 on: August 28, 2018, 11:03:29 AM »
I remember someone telling me that that third wire going to the lockout coil was meant to prevent cheating. If someone tried to defeat the coin acceptor, it would short out the machine and go dead. Hopefully I remembered the story as presented to me.

rdaniel

Offline Tat2Dave

  • NLG Member 101 to 250 Posts
  • ***
  • Posts: 129
  • Reputation Power: 7
  • Tat2Dave New User has no influence.
  • Gender: Male
  • NLG
Re: Bally 809 5 coin multiplier
« Reply #4 on: August 29, 2018, 08:24:27 PM »
I have lights, first coin light is on without putting a nickel in, nickels still fall through, it was making a humming sound and shutting off, i taped the coin switch and now it stays on. Bottom flourescent lights are blinking on and off
« Last Edit: August 30, 2018, 12:08:05 AM by rokgpsman »

Offline Amechanic

  • In Remembrance of our lost NLG Members
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 4657
  • Reputation Power: 306
  • Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!
  • Gender: Male
  • NLG
Re: Bally 809 5 coin multiplier
« Reply #5 on: August 29, 2018, 09:19:10 PM »
The first coin lights will be on. As should be the insert coin light. Your top box lights will stay lit till the next play. So if you played 3 coins, that will stay lit till the next play. When you insert your first coin it should go back to first coin. As for the humming, that either the scavenger coin behind the coin mech, or the coin diverter coin under the coin switch. Sounds light your games going to need to be cleaned, oiled and greased. You might have to end up cleaning the coin switch connections on the left side of the reels. That’s the lower contacts.
Please remember to make a donation to NLG for mine/our help in repairing your machines problem.. Your donations help keep this site on line.
And remember...
If it's jammed, force it.. If it breaks, it needed to be replaced anyways...

Offline DavidLee

  • Sr NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 1702
  • Reputation Power: 127
  • DavidLee Is an-NLG GOD!DavidLee Is an-NLG GOD!DavidLee Is an-NLG GOD!DavidLee Is an-NLG GOD!DavidLee Is an-NLG GOD!DavidLee Is an-NLG GOD!DavidLee Is an-NLG GOD!DavidLee Is an-NLG GOD!DavidLee Is an-NLG GOD!DavidLee Is an-NLG GOD!DavidLee Is an-NLG GOD!DavidLee Is an-NLG GOD!
  • Gender: Male
  • NLG
Re: Bally 809 5 coin multiplier
« Reply #6 on: August 29, 2018, 09:44:36 PM »
Great, making progress.

It’s good to post resolutions to problems as to help others who might have the same situation.
So what was the problem with the no lights?

Fluorescent lamp or starter maybe weak.
Starters are small grey metal cylinders. Each fluorescent light has one. Remove by twisting 1/4 turn.
Swapping starters would eliminate one or the other without taking the front of the machine apart.
The machine should be off when swapping starters.
« Last Edit: August 30, 2018, 08:23:39 AM by DavidLee »

Offline Tat2Dave

  • NLG Member 101 to 250 Posts
  • ***
  • Posts: 129
  • Reputation Power: 7
  • Tat2Dave New User has no influence.
  • Gender: Male
  • NLG
Re: Bally 809 5 coin multiplier
« Reply #7 on: September 08, 2018, 04:11:41 PM »
I have no idea what was wrong with the lights, i didnt do anything to fix them, they just came on. so my problem now is coins still just fall through to the tray at the bottom. Thank you every one for help, if i can get this fixed i will be glade to make a donation. Also, does anyone know a good place to get parts for my Bally 809? Thank you

Offline Jon

  • Sr NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 790
  • Reputation Power: 53
  • Jon Is on the verge of being accepted.Jon Is on the verge of being accepted.Jon Is on the verge of being accepted.Jon Is on the verge of being accepted.Jon Is on the verge of being accepted.
  • Gender: Male
  • NLG
    • Just for fun
Re: Bally 809 5 coin multiplier
« Reply #8 on: September 08, 2018, 04:40:10 PM »
What parts do you need for that machine

Offline Amechanic

  • In Remembrance of our lost NLG Members
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 4657
  • Reputation Power: 306
  • Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!
  • Gender: Male
  • NLG
Re: Bally 809 5 coin multiplier
« Reply #9 on: September 08, 2018, 05:37:24 PM »
Have you tried to flick the coin switch right under the coin mech? You should hear a click or thud as the stepper unit advances.
Please remember to make a donation to NLG for mine/our help in repairing your machines problem.. Your donations help keep this site on line.
And remember...
If it's jammed, force it.. If it breaks, it needed to be replaced anyways...

Offline DavidLee

  • Sr NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 1702
  • Reputation Power: 127
  • DavidLee Is an-NLG GOD!DavidLee Is an-NLG GOD!DavidLee Is an-NLG GOD!DavidLee Is an-NLG GOD!DavidLee Is an-NLG GOD!DavidLee Is an-NLG GOD!DavidLee Is an-NLG GOD!DavidLee Is an-NLG GOD!DavidLee Is an-NLG GOD!DavidLee Is an-NLG GOD!DavidLee Is an-NLG GOD!DavidLee Is an-NLG GOD!
  • Gender: Male
  • NLG
Re: Bally 809 5 coin multiplier
« Reply #10 on: September 08, 2018, 05:40:53 PM »
On the inside of the door at the bottom of the coin mechanism is a coin switch.
Gently press the wire down to simulate a coin. This may reset the machine. If the machine is in running order the handle can be pulled.
 
If the coin still drops to the tray. Could be the coin lock out is out of order.
With the machine door open place your ear near door inside.
Plug or switch the machine on. There should be a distinct click sound.
If you don't hear it then there is a malfunction with the coin lock out.
Post a close up photo of the coin mechanism with plenty of lighting.
One photo with machine on another with machine off. 

Offline Tat2Dave

  • NLG Member 101 to 250 Posts
  • ***
  • Posts: 129
  • Reputation Power: 7
  • Tat2Dave New User has no influence.
  • Gender: Male
  • NLG
Re: Bally 809 5 coin multiplier
« Reply #11 on: September 09, 2018, 05:14:00 PM »
Heres pictures the coin switch, and would like to know if that resister should be there? Thank you

Offline Amechanic

  • In Remembrance of our lost NLG Members
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 4657
  • Reputation Power: 306
  • Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!Amechanic Is an-NLG GOD!
  • Gender: Male
  • NLG
Re: Bally 809 5 coin multiplier
« Reply #12 on: September 09, 2018, 05:19:30 PM »
That’s the correct original resistor
Please remember to make a donation to NLG for mine/our help in repairing your machines problem.. Your donations help keep this site on line.
And remember...
If it's jammed, force it.. If it breaks, it needed to be replaced anyways...

Offline Tat2Dave

  • NLG Member 101 to 250 Posts
  • ***
  • Posts: 129
  • Reputation Power: 7
  • Tat2Dave New User has no influence.
  • Gender: Male
  • NLG
Re: Bally 809 5 coin multiplier
« Reply #13 on: September 09, 2018, 05:27:47 PM »
Picture with machine off, can here clicking sound when i push down the little wire and can pull handle to spin the wheels, coin still falls through. i saw the crappy solder job and thought someone  put it on there

Offline Tat2Dave

  • NLG Member 101 to 250 Posts
  • ***
  • Posts: 129
  • Reputation Power: 7
  • Tat2Dave New User has no influence.
  • Gender: Male
  • NLG
Re: Bally 809 5 coin multiplier
« Reply #14 on: September 09, 2018, 05:37:35 PM »
There was a noise when i just plugged it in, as for parts, im waiting to hear back from someone but its been 5 days now. I need a star for the hopper, a ramp switch (E 106-92) a lockout coil (M-37-2700) and a belly glass (g-350- series) or M-1370- series) for my Bally 809-8ZD.

Offline Jon

  • Sr NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 790
  • Reputation Power: 53
  • Jon Is on the verge of being accepted.Jon Is on the verge of being accepted.Jon Is on the verge of being accepted.Jon Is on the verge of being accepted.Jon Is on the verge of being accepted.
  • Gender: Male
  • NLG
    • Just for fun
Re: Bally 809 5 coin multiplier
« Reply #15 on: September 09, 2018, 05:56:32 PM »
The hopper store stirrer is readily available on eBay depending on where you live you should probably get it in 2 days the ramps which I'm sure I've got a door I can pull one off of and I am sure I have a lockout coil what part of the world are you in and we will discuss shipping and cost in the next week I'm going to open up another 500 pieces of glass I have boxed up in storage I moved here two and a half years ago and have not opened up all of my glass I'm sure I will have something really cool for your belly glass for that machine take a picture of the ID tag will look and see if it was from a specific Casino I might even have glass for that place

Offline DavidLee

  • Sr NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 1702
  • Reputation Power: 127
  • DavidLee Is an-NLG GOD!DavidLee Is an-NLG GOD!DavidLee Is an-NLG GOD!DavidLee Is an-NLG GOD!DavidLee Is an-NLG GOD!DavidLee Is an-NLG GOD!DavidLee Is an-NLG GOD!DavidLee Is an-NLG GOD!DavidLee Is an-NLG GOD!DavidLee Is an-NLG GOD!DavidLee Is an-NLG GOD!DavidLee Is an-NLG GOD!
  • Gender: Male
  • NLG
Re: Bally 809 5 coin multiplier
« Reply #16 on: September 09, 2018, 05:59:58 PM »
There is a adjusting screw missing.
This controls the speed of the coin.
Any machine screw with the correct threads will work.
Appropriate length .625 - .750

Offline Jon

  • Sr NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 790
  • Reputation Power: 53
  • Jon Is on the verge of being accepted.Jon Is on the verge of being accepted.Jon Is on the verge of being accepted.Jon Is on the verge of being accepted.Jon Is on the verge of being accepted.
  • Gender: Male
  • NLG
    • Just for fun
Re: Bally 809 5 coin multiplier
« Reply #17 on: September 09, 2018, 06:07:33 PM »
Very good eye Dave for an old man you must have a good magnifying glass on your computer monitor yes that's crew will cause it not to accept the coin properly

Offline Tat2Dave

  • NLG Member 101 to 250 Posts
  • ***
  • Posts: 129
  • Reputation Power: 7
  • Tat2Dave New User has no influence.
  • Gender: Male
  • NLG
Re: Bally 809 5 coin multiplier
« Reply #18 on: September 09, 2018, 07:53:02 PM »
Nope the screw is in there.

Offline DavidLee

  • Sr NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 1702
  • Reputation Power: 127
  • DavidLee Is an-NLG GOD!DavidLee Is an-NLG GOD!DavidLee Is an-NLG GOD!DavidLee Is an-NLG GOD!DavidLee Is an-NLG GOD!DavidLee Is an-NLG GOD!DavidLee Is an-NLG GOD!DavidLee Is an-NLG GOD!DavidLee Is an-NLG GOD!DavidLee Is an-NLG GOD!DavidLee Is an-NLG GOD!DavidLee Is an-NLG GOD!
  • Gender: Male
  • NLG
Re: Bally 809 5 coin multiplier
« Reply #19 on: September 09, 2018, 08:36:16 PM »
Just replaced a screw like that a few days ago. To hard to adjust. If you put a slot head screw in its place, it will be a lot easier to adjust. As this can be a very fine adjustment in some cases as small as 1/8 turn.
On the other side of the the mechanism there is a coin diverting adjustment. Most or the time they are chrome plated, but rarely need adjustment. Check to see if it’s still on the mechanism.
Also, if the door is open, the angle of the door will cause the coin to pass into the tray.
Sometimes a little compressed air will help clean the unit.

 

Cell Phone and Pad Mode

imode wap wap2

NLG Archives

Archives @ newlifegames.net Wayback Machine

Contact Us

NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442
If you find this site helpful, please consider becoming a Contributing NLG Member with a monthly subscription to help cover the cost of pizza, coffee, aspirin, hosting, and bandwidth.
Contributing Members: get unlimited personal messages, can save topics and replies as drafts,
can post to the Classified ads, get unlimited access to the downloads, and also get this minty badge:



**Subscription Link** (Click Here) **Subscription Link**



           
If you would rather remain anonymous Thank You or just want to help support the site, please use this "make a donation" button:




From your entire NLG staff, thank you for supporting NLG.


New Life Games LLC 1788 HIGHWAY 95 UNIT 30 BULLHEAD CITY AZ 86442




Newlifegames.com     Newlifegames.net     Newlifegames.org

Newlifegame.com     Newlifegame.net     Newlifegame.org    Newlifegames.us

   New Life Games     NewLifeGames  NLG

 We Bring new Life to old Games    1-888-NLG-SLOTS

Are all Copyright and Trademarks of New Life Games LLC 1992 - 2022


FAIR USE NOTICE:



This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml
If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.




The NewLifeGames.com website is optimized for use with Firefox and a minimum screen resolution of 1600 x 900 pixels.

SimplePortal 2.3.5 © 2008-2012, SimplePortal