New Life Games LLC

Bill Validators, Currency Acceptors and Printers => JCM DBV-45, DBV-145, and DBV-200 Bill Validators => Topic started by: JethroP on December 17, 2020, 08:28:47 PM

Title: DBV200 Interchangability
Post by: JethroP on December 17, 2020, 08:28:47 PM

I have two DBV200's but they have different connectors.  One is in my S+ shown with two white connectors.  The other one I have has 3 connectors.  Can I use the one with 3 connectors in my S+ by changing the wiring in the machine?  If so, where can I get a pin out diagram for the DBV's?

Title: Re: DBV200 Interchangability
Post by: Jim on December 30, 2020, 07:10:02 PM

I don't think you can, all the data and power come from the power supply mounted on the side of the housing.  plus the IDO is wrong for that machine,  you need IDO23.   

Jim