New Life Games LLC

**Video Poker, Keno, Slots, 21** Gaming machines => IGT I-Game and Game King => Topic started by: T on March 08, 2014, 11:16:13 AM

Title: Remove / Replace Belly Glass
Post by: T on March 08, 2014, 11:16:13 AM

Hello Guys
 
How do I remove the belly glass. I just don't see. Must be so easy I am blinded by the light. Thanks for the help
 
T

Title: Re: Remove / Replace Belly Glass
Post by: erbs on March 08, 2014, 12:17:25 PM

If you have an I game or GameKing you pull out on the small knob on the right side of the door just back of the belly glass. The front frame that holds the glass in and the glass will drop down. Then you will have to remove a few screws and or nuts the take the glass out. Once you open the front you will see the nuts.

Title: Re: Remove / Replace Belly Glass
Post by: T on March 08, 2014, 01:39:44 PM

Quote from: erbs on March 08, 2014, 12:17:25 PM

If you have an I game or GameKing you pull out on the small knob on the right side of the door just back of the belly glass. The front frame that holds the glass in and the glass will drop down. Then you will have to remove a few screws and or nuts the take the glass out. Once you open the front you will see the nuts.

Thanks,


I am not sure what nuts to remove. There are quite a few of them. I will look again.

Title: Re: Remove / Replace Belly Glass
Post by: CVslots on March 08, 2014, 02:44:38 PM

There are 3 at the bottom (hinge side) that hold the light panel assembly in. Remove those 3 at the hinge and the light assembly lifts out/up. Under that, your belly glass is just laying in the tracks of the frame. Push up with one hand (from the outside/face) on the belly glass and then you can grab it from inside the belly door and remove it completely.

Title: Re: Remove / Replace Belly Glass
Post by: T on March 08, 2014, 03:08:54 PM

Quote from: CVslots on March 08, 2014, 02:44:38 PM

There are 3 at the bottom (hinge side) that hold the light panel assembly in. Remove those 3 at the hinge and the light assembly lifts out/up. Under that, your belly glass is just laying in the tracks of the frame. Push up with one hand (from the outside/face) on the belly glass and then you can grab it from inside the belly door and remove it completely.

Thanks Darrel,
 
I am such a bonehead sometimes. I ended up removing 2 nuts on each side of the glass and it came right out. I just thought maybe I was missing a much easier way. BTY, the piece of glass I was replacing is the Alien belly glass I purchased from you. I wanted to see how it looks inserted in machine with a light on it. Here is a picture of the beast in action.

Title: Re: Remove / Replace Belly Glass
Post by: CVslots on March 08, 2014, 03:20:09 PM

Good deal!