New Life Games LLC
General NLG Chat => Before and After Restoration Pics => Topic started by: Ezequiel on October 01, 2018, 09:30:16 PM
-
¡Buenos dÃas!
He comprado una máquina tragaperras en un precio muy bajo (1,600 $ AR = U $ D 40!).
La placa base es S +. Cuando está encendido, el famoso error 12 apareció.
Puedo cambiar la baterÃa y siga las instrucciones para iniciarlo.
El costo fue de 40 U $ D (Slot) + 6,25 U $ D (baterÃa)
La máquina vuelve a la vida!
Soy nuevo en la escena ranura, pero tenÃa curiosidad. Voy a tratar de explicar lo mejor posible los pasos de su restauración (mi Inglés es muy malo!)
-
The problems found are:
Error 12 (solved)
Hopper does not work
comparitor
Error 43 (solved)
Noisy electronics
Spiders and other insects inside
Appearance
Failed locks
Eprom game
Tomorrow I will upload some photos of the step by step.
-
translation of the first post
Good Morning!
I bought a slot machine at a very low price ($ 1,600 AR = $ 40!).
The motherboard is S +. When it is on, the famous error 12 appeared.
I can change the battery and follow the instructions to start it.
The cost was 40 U $ D (Slot) + 6.25 U $ D (battery)
The machine comes back to life!
I'm new to the slot scene, but I was curious. I will try to explain as best as possible the steps of its restoration (my English is very bad!)
-
Initial state ... :24:
-
Oxide inside, there was probably liquid inside :Scratch-Head:
-
First action, stop the advance of oxidation.
-
The lights work correctly. The glass was clean !!!
The reels were cleaned.
-
Error 43 is caused by the opto sensor.
Reel number 3 never stops on its own. When it stops, error 43 appears.
The installed original is HOA6241-1. I was not able to find your datasheet.
In Argentina they do not sell it. Impossible ... disappeared in action. :no:
I got one of equal dimension, only hope, there are no options.
It is about TCST2103 (Vishay Siliconix) Use focused ARDUINO world
IT WORKS PERFECT! :applause: [size=78%] pinout is identical. It is still working so far without problems[/size]
-
Painting test ...
The color that I like is intense blue.
A small advance :stirthepot:
-
TIPS
The motherboard of the S +, includes a Siemens microprocessor (SAB-C501LP).
Perform some tests with Intel P80C32.
They were satisfactory, to keep in mind if the Siemens goes to heaven...
-
The lock of the reels was broken, I needed a change.
The only thing accessible to buy, needed a reform. The work was very good.
The lock support was in poor condition.
-
The machine is from 1992, it has been used 24 hours a day for several years in some casino ...
The capacitors have a useful life. I prefer to change them all. It is not much work.
The power supply has, 6800 uf x 25 V and 16 V and 10000 uf x 25 V.
All the capacitors of the motherboard were replaced.
-
I could paint a little more.
The locks above and below were installed.
-
Excellent work! I salute you!! :cool_thumb_up:
-
Wow, nice work! Glad you were able to get it fixed and working :applause: .
-
Thank you!!!
Excellent work! I salute you!! :cool_thumb_up:
-
Next week I buy another at a good price.
I'm going to be fired from home...
Thanks for your comment!
Wow, nice work! Glad you were able to get it fixed and working :applause: .