New Life Games LLC

**Video Poker, Keno, Slots, 21** Gaming machines => IGT I-Game and Game King => Topic started by: BALLIGATOR on July 30, 2014, 01:23:23 AM

Title: "Call Attendant" won't clear on my GK
Post by: BALLIGATOR on July 30, 2014, 01:23:23 AM

Hi,


To make a long story short, my GK show a low battery tilt, not the green one because there is no reen one but the other one: the 3 V.


I replaced it but I soldered a 3,6 v one...


When I powered on, I had a Call Attendant tilt which does not clear even after using a key 22 chip.


My GK is an old version.


What can I do? Did I fry the board???


Thanks for your help.

Title: Re: "Call Attendant" won't clear on my GK
Post by: Tilt on July 30, 2014, 06:46:09 AM

Sounds normal so far.  After changing the battery you will lose your CMOS RAM settings and should get an error message telling you that.  The RAM also wont match the EEPROM data, so you'll get another error for that as well.  Open the door with the Call Attendant message on the screen and it should tell you what the error is and what to do about it.  e.i turn key, press and hold test button...etc. 

Title: Re: "Call Attendant" won't clear on my GK
Post by: rickhunter on August 01, 2014, 10:12:58 AM

I just recently got into the igames/gameking stuff and changing games can sometimes bring up the ram error/eeprom error like 3 or four times.  Typically 4 or 5 turns of the reset key and holding the button for 2 or 3 seconds and they are good to go.