imonex coin acceptor

[Rpowell18]

i have a 1998 igt double 5x's pay with an .25 imonex acceptor in it ..i did some research and found out a few things, but nothing for a slot machine..Do you put a quarter somewhere in the acceptor..thanks here is the machine it is in..i got it for 60.00 ..i am replacing the missing parts and putting a bill validator in it .. any help will be great

[GOS]

if machine has an imonex coin acceptor that was working - you will need to replace the coin optic board located just below the imonex - there is a diode Q4 or Q2 depending on the board - that was cut to allow the imonex to work.

[Rpowell18]

Ok thanks..I will see how well it works first ,or just replace the whole piece later

[Jim]

If the Imonex is working, then you don't have to do anything, they do not require a sample coin like the CC-16.  keep in mind that when you order parts for that machine, you have an S+ type machine, not a S-2000


Jim

[Rpowell18]

Ok great...thanks again