New Life Games LLC

**Reel Slots** Gaming Machines => Bally Electromechanical => Topic started by: filounet on October 23, 2022, 01:48:34 AM

Title: Bally Circus 931 Danish model
Post by: filounet on October 23, 2022, 01:48:34 AM
Hello,

I got a Danish Bally 931 (well I have the impression) but the hooper that is present inside does not correspond to the machine.
I wanted to know if anyone at this machine, see his diagram can provide me with the locations of the wires at the level of the hooper
Thank you for your precious help

Philip
Title: Re: Bally Circus 931 Danish model
Post by: Denmark on October 23, 2022, 05:51:37 AM
Its a Swedish Circus.....max payout 20
cant help you with the hopper wires ;(

Good luck with the machine
Title: Re: Bally Circus 931 Danish model
Post by: filounet on October 23, 2022, 06:10:31 AM
En fait je viens de voir dans un coin que c'est une Bally Circus modèle 1037 qui date de 1975 donc je m’étais trompé mais cela ne me donne quand même pas ni le schéma ni les fils  :Scratch-Head:
Title: Re: Bally Circus 931 Danish model
Post by: filounet on October 31, 2022, 11:35:36 PM
I am surprised because the Swedish model has a compartment and a box under the hooper and not my machine.
Also, the top mechanism looks like the Danish 931 and not the more complicated Swedish 928 (7 coils instead of 4) but all this research still doesn't give me the diagram.
Similarly, no Bally book mentions a Circus 1037 slot (or even just a 1037 slot) although this number appears in my machine
Any help will be welcome :thank_you:
Title: Re: Bally Circus 931 Danish model
Post by: filounet on November 01, 2022, 09:30:22 AM
Here she is a Swedish girl :-)
Title: Re: Bally Circus 931 Danish model
Post by: wolftalk on November 03, 2022, 11:23:11 AM
unfortunately, I don't have any of the docs for the 1037.  You may want to start a new topic asking is if someone has that game or docs, or change the title of this thread to the 1037.

got highest possible resolution pictures of the payout disc in your game?  (email full res to slotpics@cdyn.com would be great)?

if you have the patience, you can make the docs you need ... or at least determine the correct wiring of the payout counter ... but the first step is to see if your payout disc supports the payouts on the game.

you need a disc with trace lengths for all the payouts on your glass.  Not sure what the lit pays are for the stuff by the bar-bar-bar's, but they all look like they pay 20.  So you need a disc that handles 2, 4, 6, 10, 14, 18, 20.

the only disc supporting those pays I have docs for is defined on drawing w-923-117 below (M-645-128-1 contact plate).  Bally often used the same wire colors for pay amounts, so that drawing can be used to see if your reels and hopper plug have the same wire colors.  You'll find the corresponding reel wiper wiring in https://bingo.cdyn.com/slots/820/

if that was unavailable, it's possible to there exists another disc that could be made to work ... like the incredible M-645-500 below ... you'd just cut the 7 trace shorter so the wipers left the trace on step 6.  However, that disc would require a payout counter with two wiper arms, so you'd need to find the entire payout counter.

the game wiring could be similar to the 931, and the reel wiper wiring is likely simple enough you could draw modify the one for the 820 or 931 to match your game easily.
Title: Re: Bally Circus 931 Danish model
Post by: filounet on November 03, 2022, 10:26:16 PM
Merci pour vos explications précises et complètes mais hélas le hooper installé dans la machine n'est pas le bon et la plaque de contact n'a pas non plus le bon type de paiement. Il faut que je commence par trouver la bonne plaque de contact avec ses gains si particulier
Très belle journée Philip
SimplePortal 2.3.5 © 2008-2012, SimplePortal